Hello,
Right, thank you for your feedback. Actually if we modify (add/ delete/ change) any address-family then it will reset the corresponding BGP sessions with “birc> configure” or “service bird reload”. But if you restart the service by “service bird restart”, then it will restart all sessions. Seems it is normal behavior. Thanks Saifullah From: Maria Matejka <[email protected]> Sent: Friday, April 7, 2023 6:48 PM To: [email protected]; [email protected]; 'Budiwijaya' <[email protected]> Subject: RE: How to prohibit resetting bgp neighborship after any bgp config change in bird.conf Hello! If you change bgp protocol parameters or rename your config blocks, it will restart the sessions, no matter what. Most of the knobs need restarting the session anyway, even by RFC. The "configure soft" works only for filter changes and you should't run BIRD for a long time before actually reloading the affected channels. We may suggest better if you disclose what you are actually changing. Maria On 7 April 2023 14:00:34 CEST, [email protected] <mailto:[email protected]> wrote: Hi, This is not working. Any other way? Pls suggest. Thanks & Regards Saifullah From: Budiwijaya <[email protected] <mailto:[email protected]> > Sent: Friday, April 7, 2023 3:47 PM To: [email protected] <mailto:[email protected]> Cc: [email protected] <mailto:[email protected]> Subject: Re: How to prohibit resetting bgp neighborship after any bgp config change in bird.conf Hi, Using command '#birdc configure soft' from linux command line should not reset any peers. Thank you Budiwijaya On Fri, 7 Apr 2023 at 01:03, <[email protected] <mailto:[email protected]> > wrote: Dear Forum, I am new in bird. I am getting a problem. When I am doing "service bird restart or reload" or "bird > configure" to affect any bgp config change, add, modification etc., then bgp neighborships are being reset. Is there any way to affect any configure change in bird.conf without resetting bgp neighborships? Regards // Saifullah <https://www.fiberathome.net/img/logo_main.jpg> ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- House # 7/B, Road # 13, Gulshan-1, Dhaka-1212, Phone: +880 2 8814615-6, 8814868 Email: [email protected] <mailto:[email protected]> , Website: https://www.fiberathome.net/ <https://www.fiberathome.net/img/logo_main.jpg> ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- House # 7/B, Road # 13, Gulshan-1, Dhaka-1212, Phone: +880 2 8814615-6, 8814868 Email: [email protected] <mailto:[email protected]> , Website: https://www.fiberathome.net/ Connecting our future with light
