tree 562cc3afcd251dd637d5a35e516220bb42d4b92b
parent d054b5acfe1f68460fe70aff5028ad95a7a38140
author Kumar Gala <[EMAIL PROTECTED]> Thu, 28 Jul 2005 01:44:07 -0700
committer Linus Torvalds <[EMAIL PROTECTED]> Thu, 28 Jul 2005 06:25:55 -0700
[PATCH] ppc32: Make the UARTs on MPC824x individual platform devices
The UARTs on the MPC824x are unique devices and really shouldn't be thought
of as a DUART. In addition, if both UARTs are in use we need to configure
the part to enable the 2nd UART since the pins for the UARTs are
multiplexed. Adds support to run the 824x Sandpoint with both UARTs if
desired.
Signed-off-by: Matt McClintock <[EMAIL PROTECTED]>
Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
Signed-off-by: Linus Torvalds <[EMAIL PROTECTED]>
arch/ppc/Kconfig | 7 ++++
arch/ppc/configs/sandpoint_defconfig | 2 -
arch/ppc/platforms/sandpoint.c | 17 ++++++----
arch/ppc/syslib/mpc10x_common.c | 55 ++++++++++++++++++++++++++++-------
include/asm-ppc/mpc10x.h | 3 +
5 files changed, 64 insertions(+), 20 deletions(-)
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -878,6 +878,13 @@ config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
+config SANDPOINT_ENABLE_UART1
+ bool "Enable DUART mode on Sandpoint"
+ depends on SANDPOINT
+ help
+ If this option is enabled then the MPC824x processor will run
+ in DUART mode instead of UART mode.
+
config CPC710_DATA_GATHERING
bool "Enable CPC710 data gathering"
depends on K2
diff --git a/arch/ppc/configs/sandpoint_defconfig
b/arch/ppc/configs/sandpoint_defconfig
--- a/arch/ppc/configs/sandpoint_defconfig
+++ b/arch/ppc/configs/sandpoint_defconfig
@@ -437,7 +437,7 @@ CONFIG_SOUND_GAMEPORT=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
--- a/arch/ppc/platforms/sandpoint.c
+++ b/arch/ppc/platforms/sandpoint.c
@@ -311,19 +311,22 @@ sandpoint_setup_arch(void)
{
bd_t *bp = (bd_t *)__res;
struct plat_serial8250_port *pdata;
- pdata = (struct plat_serial8250_port *)
ppc_sys_get_pdata(MPC10X_DUART);
+ pdata = (struct plat_serial8250_port *)
ppc_sys_get_pdata(MPC10X_UART0);
if (pdata)
{
pdata[0].uartclk = bp->bi_busfreq;
- pdata[0].membase = ioremap(pdata[0].mapbase, 0x100);
+ }
- /* this disables the 2nd serial port on the DUART
- * since the sandpoint does not have it connected */
- pdata[1].uartclk = 0;
- pdata[1].irq = 0;
- pdata[1].mapbase = 0;
+#ifdef CONFIG_SANDPOINT_ENABLE_UART1
+ pdata = (struct plat_serial8250_port *)
ppc_sys_get_pdata(MPC10X_UART1);
+ if (pdata)
+ {
+ pdata[0].uartclk = bp->bi_busfreq;
}
+#else
+ ppc_sys_device_remove(MPC10X_UART1);
+#endif
}
printk(KERN_INFO "Motorola SPS Sandpoint Test Platform\n");
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
--- a/arch/ppc/syslib/mpc10x_common.c
+++ b/arch/ppc/syslib/mpc10x_common.c
@@ -45,24 +45,29 @@
#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS)
+#define MPC10X_UART1_IRQ (EPIC_IRQ_BASE + 5 + NUM_8259_INTERRUPTS)
#else
#define MPC10X_I2C_IRQ -1
#define MPC10X_DMA0_IRQ -1
#define MPC10X_DMA1_IRQ -1
#define MPC10X_UART0_IRQ -1
+#define MPC10X_UART1_IRQ -1
#endif
static struct fsl_i2c_platform_data mpc10x_i2c_pdata = {
.device_flags = 0,
};
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_plat_uart0[] = {
[0] = {
.mapbase = 0x4500,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
- [1] = {
+ { },
+};
+static struct plat_serial8250_port serial_plat_uart1[] = {
+ [0] = {
.mapbase = 0x4600,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
@@ -133,11 +138,17 @@ struct platform_device ppc_sys_platform_
},
},
},
- [MPC10X_DUART] = {
+ [MPC10X_UART0] = {
.name = "serial8250",
.id = 0,
- .dev.platform_data = serial_platform_data,
+ .dev.platform_data = serial_plat_uart0,
+ },
+ [MPC10X_UART1] = {
+ .name = "serial8250",
+ .id = 1,
+ .dev.platform_data = serial_plat_uart1,
},
+
};
/* We use the PCI ID to match on */
@@ -147,10 +158,10 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8245",
.mask = 0xFFFFFFFF,
.value = MPC10X_BRIDGE_8245,
- .num_devices = 4,
+ .num_devices = 5,
.device_list = (enum ppc_sys_devices[])
{
- MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_DUART,
+ MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_UART0,
MPC10X_UART1,
},
},
{
@@ -180,6 +191,25 @@ struct ppc_sys_spec ppc_sys_specs[] = {
},
};
+/*
+ * mach_mpc10x_fixup: This function enables DUART mode if it detects
+ * if it detects two UARTS in the platform device entries.
+ */
+static int __init mach_mpc10x_fixup(struct platform_device *pdev)
+{
+ if (strncmp (pdev->name, "serial8250", 10) == 0 && pdev->id == 1)
+ writeb(readb(serial_plat_uart1[0].membase + 0x11) | 0x1,
+ serial_plat_uart1[0].membase + 0x11);
+ return 0;
+}
+
+static int __init mach_mpc10x_init(void)
+{
+ ppc_sys_device_fixup = mach_mpc10x_fixup;
+ return 0;
+}
+postcore_initcall(mach_mpc10x_init);
+
/* Set resources to match bridge memory map */
void __init
mpc10x_bridge_set_resources(int map, struct pci_controller *hose)
@@ -219,6 +249,7 @@ mpc10x_bridge_set_resources(int map, str
ppc_md.progress("mpc10x:exit1", 0x100);
}
}
+
/*
* Do some initialization and put the EUMB registers at the specified address
* (also map the EPIC registers into virtual space--OpenPIC_Addr will be set).
@@ -411,11 +442,13 @@ mpc10x_bridge_init(struct pci_controller
ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start =
MPC10X_DMA1_IRQ;
ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ;
- serial_platform_data[0].mapbase += phys_eumb_base;
- serial_platform_data[0].irq = MPC10X_UART0_IRQ;
-
- serial_platform_data[1].mapbase += phys_eumb_base;
- serial_platform_data[1].irq = MPC10X_UART0_IRQ + 1;
+ serial_plat_uart0[0].mapbase += phys_eumb_base;
+ serial_plat_uart0[0].irq = MPC10X_UART0_IRQ;
+ serial_plat_uart0[0].membase = ioremap(serial_plat_uart0[0].mapbase,
0x100);
+
+ serial_plat_uart1[0].mapbase += phys_eumb_base;
+ serial_plat_uart1[0].irq = MPC10X_UART1_IRQ;
+ serial_plat_uart1[0].membase = ioremap(serial_plat_uart1[0].mapbase,
0x100);
/*
* 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
diff --git a/include/asm-ppc/mpc10x.h b/include/asm-ppc/mpc10x.h
--- a/include/asm-ppc/mpc10x.h
+++ b/include/asm-ppc/mpc10x.h
@@ -163,7 +163,8 @@ enum ppc_sys_devices {
MPC10X_IIC1,
MPC10X_DMA0,
MPC10X_DMA1,
- MPC10X_DUART,
+ MPC10X_UART0,
+ MPC10X_UART1,
};
int mpc10x_bridge_init(struct pci_controller *hose,
-
To unsubscribe from this list: send the line "unsubscribe bk-commits-head" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
