Jürg Billeter wrote these words on 09/29/05 14:59 CST: > Are you sure that your hotplug > installation works fine, i.e. you're using either classic hotplug (so > that hal.hoptlug link in /etc/hotplug.d/default should be called) or > pure udev (with an appropriate udev rule for hal)?
I can see this. The following will appear as output by running '/etc/rc.d/init.d/hotplug status' *only* when the device is plugged in. Removing the device and rerunning the command and this output will not be displayed: T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 31 Spd=12 MxCh= 0 P: Vendor=08ec ProdID=0008 Rev= 1.00 S: Manufacturer=Memorex S: Product=TD 2C S: SerialNumber=2821DB40C24E I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage -- Randy rmlscsi: [GNU ld version 2.15.94.0.2 20041220] [gcc (GCC) 3.4.3] [GNU C Library stable release version 2.3.4] [Linux 2.6.10 i686] 15:34:00 up 4 days, 23:58, 3 users, load average: 0.09, 0.12, 0.33 -- http://linuxfromscratch.org/mailman/listinfo/blfs-dev FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
