On October 2, 2019 3:41:05 PM CDT, Ken Moffat via blfs-dev <[email protected]> wrote:
> >[ 37.281] (II) AMDGPU: Driver for AMD Radeon: > All GPUs supported by the amdgpu kernel driver >[ 37.281] (II) modesetting: Driver for Modesetting Kernel Drivers: >kms >[ 37.281] (++) using VT number 1 > >[ 37.281] (II) AMDGPU(0): [KMS] Kernel modesetting enabled. >[ 37.282] (WW) Falling back to old probe method for modesetting >[ 37.282] (WW) VGA arbiter: cannot open kernel arbiter, no >multi-card support >[ 37.282] (II) AMDGPU(0): Creating default Display subsection in >Screen section > "Default Screen Section" for depth/fbbpp 24/32 >[ 37.282] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32 >[ 37.282] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes >(32 bpp pixmaps) >[ 37.282] (==) AMDGPU(0): Default visual is TrueColor >[ 37.282] (==) AMDGPU(0): RGB weight 888 >[ 37.282] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC) >[ 37.282] (--) AMDGPU(0): Chipset: "Unknown AMD Radeon GPU" (ChipID >= 0x15d8) Is this an add-on card, or Mobo? Searching for that ID have best guess as an RX570. >[ 37.282] (II) Loading sub module "fb" >[ 37.282] (II) LoadModule: "fb" >[ 37.282] (II) Loading /usr/lib/xorg/modules/libfb.so >[ 37.283] (II) Module fb: vendor="X.Org Foundation" >[ 37.283] compiled for 1.20.5, module version = 1.0.0 >[ 37.283] ABI class: X.Org ANSI C Emulation, version 0.4 >[ 37.283] (II) Loading sub module "dri2" >[ 37.283] (II) LoadModule: "dri2" >[ 37.283] (II) Module "dri2" already built-in >[ 37.438] (II) Loading sub module "glamoregl" >[ 37.438] (II) LoadModule: "glamoregl" >[ 37.438] (II) Loading /usr/lib/xorg/modules/libglamoregl.so >[ 37.443] (II) Module glamoregl: vendor="X.Org Foundation" >[ 37.443] compiled for 1.20.5, module version = 1.0.1 >[ 37.443] ABI class: X.Org ANSI C Emulation, version 0.4 >[ 37.468] (II) AMDGPU(0): glamor X acceleration enabled on AMD RAVEN >(DRM 3.33.0, 5.3.1, LLVM 8.0.1) >[ 37.468] (II) AMDGPU(0): glamor detected, initialising EGL layer. >[ 37.468] (==) AMDGPU(0): TearFree property default: auto >[ 37.468] (==) AMDGPU(0): VariableRefresh: disabled >[ 37.468] (II) AMDGPU(0): KMS Pageflipping: enabled >[ 37.468] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section >[ 37.468] (II) AMDGPU(0): Output DVI-D-0 has no monitor section >[ 37.468] (II) AMDGPU(0): Output DisplayPort-0 has no monitor >section >[ 37.483] (II) AMDGPU(0): EDID for output HDMI-A-0 >[ 37.483] (II) AMDGPU(0): Manufacturer: ACR Model: 42e Serial#: >2215641880 >[ 37.483] (II) AMDGPU(0): Year: 2018 Week: 41 >[ 37.483] (II) AMDGPU(0): EDID Version: 1.3 >[ 37.483] (II) AMDGPU(0): Digital Display Input >[ 37.483] (II) AMDGPU(0): DFP 1.x compatible TMDS >[ 37.483] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 52 vert.: 29 >[ 37.483] (II) AMDGPU(0): Gamma: 2.20 >[ 37.483] (II) AMDGPU(0): DPMS capabilities: Off >[ 37.483] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb >4:4:4 >[ 37.483] (II) AMDGPU(0): First detailed timing is preferred mode >[ 37.483] (II) AMDGPU(0): redX: 0.633 redY: 0.340 greenX: 0.314 >greenY: 0.632 >[ 37.483] (II) AMDGPU(0): blueX: 0.159 blueY: 0.060 whiteX: 0.313 >whiteY: 0.329 >[ 37.483] (II) AMDGPU(0): Supported established timings: >[ 37.483] (II) AMDGPU(0): 720x400@70Hz > >(snip 'established' timings) > >[ 37.483] (II) AMDGPU(0): 1280x1024@75Hz >[ 37.483] (II) AMDGPU(0): Manufacturer's mask: 0 >[ 37.483] (II) AMDGPU(0): Supported standard timings: >[ 37.483] (II) AMDGPU(0): #0: hsize: 1920 vsize 1080 refresh: 60 >vid: 49361 >[ 37.483] (II) AMDGPU(0): #1: hsize: 1680 vsize 1050 refresh: 60 >vid: 179 >[ 37.483] (II) AMDGPU(0): #2: hsize: 1440 vsize 900 refresh: 60 >vid: 149 >[ 37.483] (II) AMDGPU(0): #3: hsize: 1280 vsize 1024 refresh: 60 >vid: 32897 >[ 37.483] (II) AMDGPU(0): #4: hsize: 1280 vsize 960 refresh: 60 >vid: 16513 >[ 37.483] (II) AMDGPU(0): #5: hsize: 1280 vsize 720 refresh: 60 >vid: 49281 >[ 37.483] (II) AMDGPU(0): Supported detailed timing: >[ 37.483] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 509 x 286 >mm >[ 37.483] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end >2052 h_blank_end 2200 h_border: 0 >[ 37.483] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end >1089 v_blanking: 1125 v_border: 0 >[ 37.483] (II) AMDGPU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 >H max: 83 kHz, PixClock max 175 MHz >[ 37.483] (II) AMDGPU(0): Serial No: T2JEE0094209 >[ 37.483] (II) AMDGPU(0): Monitor name: Acer K242HQL >[ 37.483] (II) AMDGPU(0): Supported detailed timing: >[ 37.483] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 509 x 286 >mm >[ 37.483] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end >2052 h_blank_end 2200 h_border: 0 >[ 37.483] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end >1089 v_blanking: 1125 v_border: 0 >[ 37.483] (II) AMDGPU(0): Supported detailed timing: >[ 37.483] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 509 x 286 >mm >[ 37.483] (II) AMDGPU(0): h_active: 1280 h_sync: 1390 h_sync_end >1430 h_blank_end 1650 h_border: 0 >[ 37.483] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 >v_blanking: 750 v_border: 0 >[ 37.483] (II) AMDGPU(0): Supported detailed timing: >[ 37.483] (II) AMDGPU(0): clock: 74.2 MHz Image Size: 509 x 286 >mm >[ 37.483] (II) AMDGPU(0): h_active: 1280 h_sync: 1720 h_sync_end >1760 h_blank_end 1980 h_border: 0 >[ 37.483] (II) AMDGPU(0): v_active: 720 v_sync: 725 v_sync_end 730 >v_blanking: 750 v_border: 0 >[ 37.483] (II) AMDGPU(0): Supported detailed timing: >[ 37.483] (II) AMDGPU(0): clock: 27.0 MHz Image Size: 509 x 286 >mm >[ 37.483] (II) AMDGPU(0): h_active: 720 h_sync: 732 h_sync_end 796 >h_blank_end 864 h_border: 0 >[ 37.483] (II) AMDGPU(0): v_active: 576 v_sync: 581 v_sync_end 586 >v_blanking: 625 v_border: 0 >[ 37.483] (II) AMDGPU(0): Number of EDID sections to follow: 1 >[ 37.483] (II) AMDGPU(0): EDID (in hex): >[ 37.483] (II) AMDGPU(0): 00ffffffffffff0004722e0418031084 > >(snip rest of EDID, probed modes for output HDMI-A-0 and their >modelines) > We are prodding the hardware here, so things are good to this point. >[ 37.483] (II) AMDGPU(0): EDID for output DVI-D-0 >[ 37.483] (II) AMDGPU(0): EDID for output DisplayPort-0 >[ 37.483] (II) AMDGPU(0): Output HDMI-A-0 connected >[ 37.483] (II) AMDGPU(0): Output DVI-D-0 disconnected >[ 37.483] (II) AMDGPU(0): Output DisplayPort-0 disconnected >[ 37.483] (II) AMDGPU(0): Using exact sizes for initial modes >[ 37.483] (II) AMDGPU(0): Output HDMI-A-0 using initial mode >1920x1080 +0+0 >[ 37.483] (II) AMDGPU(0): mem size init: gart size :bf7d9000 vram >size: s:7e852000 visible:7e852000 >[ 37.483] (==) AMDGPU(0): DPI set to (96, 96) >[ 37.483] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0) >[ 37.483] (II) Loading sub module "ramdac" >[ 37.483] (II) LoadModule: "ramdac" >[ 37.483] (II) Module "ramdac" already built-in >[ 37.483] (II) UnloadModule: "modesetting" >[ 37.483] (II) Unloading modesetting >[ 37.484] Unable to retrieve master >[ 37.484] (EE) >Fatal server error: >[ 37.484] (EE) AddScreen/ScreenInit failed for driver 0 >[ 37.484] (EE) >[ 37.484] (EE) >Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. >[ 37.484] (EE) Please also check the log file at >"/home/ken/.local/share/xorg/Xorg.0.log" for additional information. >[ 37.484] (EE) >[ 37.503] (EE) Server terminated with error (1). Closing log file. Is it complaining about the vt? You did remove the sed in the Xorg build, correct? ch{own,mod} the TTY nodes. Can't help but think that we are barking up the wrong tree here. --DJ -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -- http://lists.linuxfromscratch.org/listinfo/blfs-dev FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
