Hi!
I'm having a problem with alsa and oss emulation, when I start kcontrol
to enter the sound system menu on the general tab the test sound works
but the test midi no, (error message in the console ALSA lib
seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or
directory), the output in the console for these two test is this:
server status: running, autosuspend disabled
real-time status: real-time
server buffer time: 46.4399 ms
buffer size multiplier: 1
minimum stream buffer time: 46.4399 ms
auto suspend time: 0 s
audio method: alsa
sampling rate: 44100
channels: 2
sample size: 16 bits
duplex: full
device: default
fragments: 2
fragment size: 4096
server status: busy
real-time status: real-time
server buffer time: 46.4399 ms
buffer size multiplier: 1
minimum stream buffer time: 46.4399 ms
auto suspend time: 0 s
audio method: alsa
sampling rate: 44100
channels: 2
sample size: 16 bits
duplex: full
device: default
fragments: 2
fragment size: 4096
I added a specific rule to 15-alsa.rules to load a SF2 file on startup
and added the entries for oss emulation in modprobe.conf.
KinfoCenter about the sound tells the following:
Installed drivers: Type 10: ALSA emulation
Card config: Audigy 2 ZS [SB0350](rev.4, serial:0x20021102) at 0xd000,
irq 217
M Audio Audiophile 24/96 at 0xe800, irq 193
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED IN CONFIG
Midi devices: 0: Audigy MPU-401 (UART)
1: M Audio Audiophile 24/96 MIDI
Timers: 31: system timer
Mixers: NOT ENABLED IN CONFIG
However in the kcontrol center in the hardware tab I selected ALSA as
sound, but in the midi section in gave no output for the midi device and
don't let me use the mapper midi.
Attached are the specific files.
Bye,
Luca
blacklist emu10k1
blacklist eth1394
alias char-major-116 snd
options snd-emu10k1 index=0
options snd-ice1712 index=1
options snd-via82xx index=2
# qnJ_.t3RdoeOdN+4:SB Audigy
alias snd-card-0 snd-emu10k1
# lgGW.oA8Yuvq001D:M-Audio Delta Audiophile
alias snd-card-1 snd-ice1712
# Ssy1.wXN6pYJ5d_9:VT8233/A/8235/8237 AC97 Audio Controller
alias snd-card-2 snd-via82xx
alias char-major-14 soundcore
alias sound-slot-0 snd-emu10k1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias eth0 ns83820
#!/bin/sh -e
CARD=${DEVNAME##/dev/snd/hwC}
CARD=${CARD%%D0}
case $PHYSDEVDRIVER in
EMU10K1_Audigy)
echo -en "\xf0\x00\x20\x21\x61\x00\x00\x00\x7f\x00\xf7" >
/dev/snd/midiC${CARD}D1
/etc/alsa.d/load-soundfont $CARD CT4MGM.SF2
;;
sbawe)
/etc/alsa.d/load-soundfont $CARD default.bnk default.sf2 default.sbk
gu11-rom.sf2 GU11-ROM.SF2
;;
esac
exit 0
#!/bin/sh -e
CARD=$1
shift
test -x /usr/bin/asfxload || exit 0
. /etc/sysconfig/sound
load_sf () {
for d in /usr/share/sounds/sf2 \
/usr/share/sfbank \
/usr/local/lib/sfbank \
/usr/share/sfbank/creative \
/usr/local/lib/sfbank/creative \
; do
if [ -r $d/$1 ]; then
/usr/bin/asfxload -Dhw:${CARD},2 $d/$1
return 0
fi
done
return 1
}
case $SOUNDFONT_FILES in
/*)
if [ -r "$SOUNDFONT_FILES" ]; then
/usr/bin/asfxload -Dhw:${CARD},2 $SOUNDFONT_FILES
exit 0
fi
;;
esac
for file in $SOUNDFONT_FILES $* ; do
if load_sf $file ; then
break
fi
done
exit 0
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
