Hi,
I do not have pci utils, i wanted to install them by floppy, but somehow it
fails to mount the floppy drive, it says:
floppy0: probe failed
and repeats that
well, i searched through the dmesg output, but it says nothing about a
network card loaded, it loads some TCP protocols.
this might be interesting as i have only 1 pci card, (and a graphics AGP
card)
PCI: Probing PCI hardware (bus 00)
and ACPI says some PCI Interrupt Link [LNK{A,B,C,D}]
i wanted to send full dmesg log to u but my floppy drive is not working, so
i can't.
Tijnema
On 2/6/07, Alan Lord <[EMAIL PROTECTED]> wrote:
Leo Peschier wrote:
> Tijnema ! wrote:
>> > "Bringing up the eth0 interface...
>> > Interface eth0 doesn't
>> > exist. [
WARN ]"
>
> Hi Tijnema,
>
> Did you, by any chance, use a descriptive device name for your card, as
is
> explained in LFS 7.13. Is so, you have to adapt
> /etc/sysconfig/network-devices/ifconfig.... likewise.
> It's just what I had, before realising.
>
> Leo.
Try looking through dmesg (use dmesg|less) and see what the kernel
thinks it finds for NICs during bootup? Also, if you haven't already,
install pciutils
(http://www.linuxfromscratch.org/blfs/view/svn/general/pciutils.html) so
you can see what the system can see on the bus.
Alan
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
