Greetings, I am having difficulty with the required kernel configuration to get a Hauppauge winTV novaT stick ( digital TV) wortking on an oldish LFS setup). I have it working on a setup with an avermedia DVB-T usb with kernels 2.16.17 and 2.6.19.1. The attached file TVdec07K2619 shows the results. it workfine with the avermedia device but notwith the hauppauge device. I have the appropriate firmware file in /lib/firmware.
I updated the kernel to 2.6,23,12. The DVB device is now recognised by kaffeine for both the avermedia as well as the winTV device but in either case I cannot scan for channels. The attached file TVdec07K2623) illustrates. Help would be appreciated. yours sincerely lux-integ
===========Kernel 2.6.23.1 with AverTV DVB-T USB2 (kaffeine recognnises DVB device but channel not scanned) a) syslog output Dec 21 20:40:21 tvdemo kernel: USB Universal Host Controller Interface driver v3.0 Dec 21 20:40:21 tvdemo kernel: dvb-usb: found a 'AVerMedia AverTV DVB-T USB 2.0 (A800)' in warm state. Dec 21 20:40:21 tvdemo kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Dec 21 20:40:21 tvdemo kernel: DVB: registering new adapter (AVerMedia AverTV DVB-T USB 2.0 (A800)) Dec 21 20:40:21 tvdemo kernel: DVB: registering frontend 0 (DiBcom 3000MC/P)... Dec 21 20:40:21 tvdemo kernel: DVB: Unable to find symbol mt2060_attach() Dec 21 20:40:21 tvdemo kernel: DVB: Unable to find symbol dvb_pll_attach() Dec 21 20:40:21 tvdemo kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input4 Dec 21 20:40:21 tvdemo kernel: dvb-usb: schedule remote query interval to 150 msecs. Dec 21 20:40:21 tvdemo kernel: dvb-usb: AVerMedia AverTV DVB-T USB 2.0 (A800) successfully initialized and connected. Dec 21 20:40:21 tvdemo kernel: usbcore: registered new interface driver dvb_usb_a800 b) wscan output [EMAIL PROTECTED]:/usr/local/bin# w_scan w_scan version 20071209 Info: using DVB adapter auto detection. Found DVB-T frontend. Using adapter /dev/dvb/adapter0/frontend0 -_-_-_-_ Getting frontend capabilities-_-_-_-_ frontend DiBcom 3000MC/P supports INVERSION_AUTO QAM_AUTO TRANSMISSION_MODE_AUTO GUARD_INTERVAL_AUTO HIERARCHY_AUTO FEC_AUTO -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 177500: 184500: 191500: 198500: 205500: 212500: 219500: 226500: 474000: 482000: 490000: 498000: 506000: 514000: 522000: 530000: 538000: 546000: 554000: 562000: 570000: 578000: 586000: 594000: 602000: 610000: 618000: 626000: 634000: 642000: 650000: 658000: 666000: 674000: 682000: 690000: 698000: 706000: 714000: 722000: 730000: 738000: 746000: 754000: 762000: 770000: 778000: 786000: 794000: 802000: 810000: 818000: 826000: 834000: 842000: 850000: 858000: ERROR: Sorry - i couldn't get any working frequency/transponder Nothing to scan!! dumping lists (0 services) Done. [EMAIL PROTECTED]:/usr/local/bin# =================Kernel 2.6.23.1 with Hauppauge WIN TV Nova-T DVB stick (kaffeine recognnises DVB device but channel not scanned) a) syslog output USB Universal Host Controller Interface driver v3.0 Dec 21 01:28:42 tvdemo kernel: dib0700: loaded with support for 2 different device-types Dec 21 01:28:42 tvdemo kernel: dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. Dec 21 01:28:42 tvdemo kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Dec 21 01:28:42 tvdemo kernel: DVB: registering new adapter (Hauppauge Nova-T Stick) Dec 21 01:28:42 tvdemo kernel: DVB: registering frontend 0 (DiBcom 7000PC)... Dec 21 01:28:42 tvdemo kernel: DVB: Unable to find symbol mt2060_attach() Dec 21 01:28:42 tvdemo kernel: dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. b) with W_scan [EMAIL PROTECTED]:~# w_scan >> /etc/vdr/channels.conf && w_scan -fc >>/etc/vdr/channels.conf w_scan version 20071209 Info: using DVB adapter auto detection. Found DVB-T frontend. Using adapter /dev/dvb/adapter0/frontend0 -_-_-_-_ Getting frontend capabilities-_-_-_-_ frontend DiBcom 7000PC supports INVERSION_AUTO QAM_AUTO TRANSMISSION_MODE_AUTO GUARD_INTERVAL_AUTO HIERARCHY_AUTO FEC_AUTO -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 177500: 184500: 191500: 198500: 205500: 212500: 219500: 226500: 474000: 482000: 490000: 498000: 506000: 514000: 522000: 530000: 538000: 546000: 554000: 562000: 570000: 578000: 586000: 594000: 602000: 610000: 618000: 626000: 634000: 642000: 650000: 658000: 666000: 674000: 682000: 690000: 698000: 706000: 714000: 722000: 730000: 738000: 746000: 754000: 762000: 770000: 778000: 786000: 794000: 802000: 810000: 818000: 826000: 834000: 842000: 850000: 858000: ERROR: Sorry - i couldn't get any working frequency/transponder Nothing to scan!! dumping lists (0 services) Done. w_scan version 20071209 Info: using DVB adapter auto detection. Info: unable to open frontend /dev/dvb/adapter1/frontend0' Info: unable to open frontend /dev/dvb/adapter2/frontend0' Info: unable to open frontend /dev/dvb/adapter3/frontend0' main:2176: FATAL: ***** NO USEABLE DVB CARD FOUND. ***** Please check wether dvb driver is loaded and verify that no dvb application (i.e. vdr) is running. [EMAIL PROTECTED]:~#
=======kernel 2.6.19.1 with AverTB -DVB-T USB working in Kaffeine a) syslog output Dec 21 21:09:54 tvdemo kernel: class_device_create_uevent called for event0 Dec 21 21:09:54 tvdemo kernel: dvb-usb: schedule remote query interval to 150 msecs. Dec 21 21:09:54 tvdemo kernel: dvb-usb: AVerMedia AverTV DVB-T USB 2.0 (A800) successfully initialized and connected. b w_scan output b)[EMAIL PROTECTED]:/home/telly# cd /usr/local/bin [EMAIL PROTECTED]:/usr/local/bin# w_scan w_scan version 20071209 Info: using DVB adapter auto detection. Found DVB-T frontend. Using adapter /dev/dvb/adapter0/frontend0 -_-_-_-_ Getting frontend capabilities-_-_-_-_ frontend DiBcom 3000MC/P supports INVERSION_AUTO QAM_AUTO TRANSMISSION_MODE_AUTO GUARD_INTERVAL_AUTO HIERARCHY_AUTO FEC_AUTO -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_ 177500: 184500: 191500: 198500: 205500: 212500: 219500: 226500: 474000: 482000: 490000: 498000: 506000: 514000: 522000: 530000: 538000: 546000: 554000: 562000: 570000: 578000: 586000: 594000: 602000: 610000: 618000: 626000: 634000: 642000: 650000: 658000: 666000: 674000: 682000: 690000: 698000: 706000: 714000: 722000: 730000: 738000: 746000: 754000: 762000: 770000: 778000: 786000: 794000: 802000: 810000: 818000: 826000: 834000: 842000: 850000: 858000: ERROR: Sorry - i couldn't get any working frequency/transponder Nothing to scan!! dumping lists (0 services) Done. ============================================================================ ========kernel 2.6.19.1-Happauge winTV novaT stick does not work a) syslog output Dec 21 21:58:38 tvdemo kernel: usb 1-5: new device strings: Mfr=1, Product=2, SerialNumber=3 Dec 21 21:58:38 tvdemo kernel: usb 1-5: Product: Nova-T Stick Dec 21 21:58:38 tvdemo kernel: usb 1-5: Manufacturer: Hauppauge Dec 21 21:58:38 tvdemo kernel: usb 1-5: SerialNumber: 4030549771 Dec 21 21:58:38 tvdemo kernel: DEV: registering device: ID = '1-5' Dec 21 21:58:38 tvdemo kernel: PM: Adding info for usb:1-5 Dec 21 21:58:38 tvdemo kernel: bus usb: add device 1-5 Dec 21 21:58:38 tvdemo kernel: usb 1-5: uevent Dec 21 21:58:38 tvdemo kernel: usb: Matched Device 1-5 with Driver usb Dec 21 21:58:38 tvdemo kernel: usb: Probing driver usb with device 1-5 Dec 21 21:58:38 tvdemo kernel: usb 1-5: usb_probe_device Dec 21 21:58:38 tvdemo kernel: DEV: registering device: ID = 'usbdev1.2_ep00' Dec 21 21:58:38 tvdemo kernel: PM: Adding info for No Bus:usbdev1.2_ep00 Dec 21 21:58:38 tvdemo kernel: usb 1-5: configuration #1 chosen from 1 choice Dec 21 21:58:38 tvdemo kernel: usb 1-5: adding 1-5:1.0 (config #1, interface 0) Dec 21 21:58:38 tvdemo kernel: DEV: registering device: ID = '1-5:1.0' Dec 21 21:58:38 tvdemo kernel: PM: Adding info for usb:1-5:1.0 Dec 21 21:58:38 tvdemo kernel: bus usb: add device 1-5:1.0 Dec 21 21:58:38 tvdemo kernel: usb 1-5:1.0: uevent Dec 21 21:58:38 tvdemo kernel: DEV: registering device: ID = 'usbdev1.2_ep01' Dec 21 21:58:38 tvdemo kernel: PM: Adding info for No Bus:usbdev1.2_ep01 Dec 21 21:58:38 tvdemo kernel: DEV: registering device: ID = 'usbdev1.2_ep81' Dec 21 21:58:38 tvdemo kernel: PM: Adding info for No Bus:usbdev1.2_ep81 Dec 21 21:58:38 tvdemo kernel: DEV: registering device: ID = 'usbdev1.2_ep82' Dec 21 21:58:38 tvdemo kernel: PM: Adding info for No Bus:usbdev1.2_ep82 Dec 21 21:58:38 tvdemo kernel: DEV: registering device: ID = 'usbdev1.2_ep83' Dec 21 21:58:38 tvdemo kernel: PM: Adding info for No Bus:usbdev1.2_ep83 Dec 21 21:58:38 tvdemo kernel: CLASS: registering class device: ID = 'usbdev1.2' Dec 21 21:58:38 tvdemo kernel: class_uevent - name = usbdev1.2 Dec 21 21:58:38 tvdemo kernel: class_device_create_uevent called for usbdev1.2 Dec 21 21:58:38 tvdemo kernel: drivers/usb/core/inode.c: creating file '002' Dec 21 21:58:38 tvdemo kernel: bound device '1-5' to driver 'usb' Dec 21 21:58:38 tvdemo kernel: usb: Bound Device 1-5 to Driver usb Dec 21 21:58:40 tvdemo kernel: usb 1-5: usb auto-suspend b) w_scan output [EMAIL PROTECTED]:/home/telly# w_scan w_scan version 20071209 Info: using DVB adapter auto detection. Info: unable to open frontend /dev/dvb/adapter0/frontend0' Info: unable to open frontend /dev/dvb/adapter1/frontend0' Info: unable to open frontend /dev/dvb/adapter2/frontend0' Info: unable to open frontend /dev/dvb/adapter3/frontend0' main:2176: FATAL: ***** NO USEABLE DVB CARD FOUND. ***** Please check wether dvb driver is loaded and verify that no dvb application (i.e. vdr) is running. [EMAIL PROTECTED]:/var/home/telly#
-- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
