Le Mon, 31 Mar 2008 21:36:39 +0200 "Wilco Beekhuizen"
<[EMAIL PROTECTED]> a écrit :
> Do you have an official Nvidia release from nvidia.com?
Yes.
> Have you enabled the drivers for your motherboard in the kernel?
This, my LFS friend, I don't really know, this is the first time since my
old PII233 that I have a Intel motherboard, having been quite fond of AMD
for a while.
What I can do is provide the full result of 'dmesg', and the result of
'lspci -v', for you to be judge. I hope this is not too much for the list.
---> begin dmesg <---
Linux version 2.6.24.2 ([EMAIL PROTECTED]) (gcc version 4.2.3) #1 Mon Mar 31
20:05:37 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f39c0
Entering add_active_range(0, 0, 524000) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 524000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 524000
On node 0 totalpages: 524000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292323 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 6:15 APIC version 17
Processor #1 6:15 APIC version 17
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
I/O APIC #4 Version 17 at 0xFEC00000.
I/O APIC #5 Version 17 at 0xFECC0000.
Enabling APIC mode: Flat. Using 2 I/O APICs
Processors: 1
Allocating PCI resources starting at 80000000 (gap: 7fef0000:60110000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519907
Kernel command line: root=/dev/hda7
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
mapped IOAPIC to ffff9000 (fecc0000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2194.549 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2074984k/2096000k available (1772k kernel code, 19928k reserved, 621k
data, 160k init, 1178496k highmem)
virtual kernel memory layout:
fixmap : 0xfffad000 - 0xfffff000 ( 328 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc035a000 - 0xc0382000 ( 160 kB)
.data : 0xc02bb27e - 0xc03567a4 ( 621 kB)
.text : 0xc0100000 - 0xc02bb27e (1772 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 4393.81 BogoMIPS (lpj=8787635)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d
00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d
00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
net_namespace: 64 bytes
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xfa0a0, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 51
PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 55
PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.1[A] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.3[B] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.4[C] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:11.5[C] -> IRQ 22
PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 48
PCI: Bridge: 0000:00:01.0
IO window: b000-bfff
MEM window: dfc00000-dfcfffff
PREFETCH window: dfb00000-dfbfffff
PCI: Bridge: 0000:00:02.0
IO window: d000-dfff
MEM window: dc000000-deffffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:03.0
IO window: c000-cfff
MEM window: dfe00000-dfefffff
PREFETCH window: dfd00000-dfdfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
PCI: Bypassing VIA 8237 APIC De-Assert Message
Boot video device is 0000:02:00.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie02]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie02]
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
loop: module loaded
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:0f.0
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
ide0: BM-DMA at 0xf800-0xf807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf808-0xf80f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hdb: IRQ probe failed (0xfffffffa)
hdb: IRQ probe failed (0xfffffffa)
hda: MAXTOR STM3320820A, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: HL-DT-STDVD-RAM GSA-H55N, ATAPI CD/DVD-ROM drive
hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdd: host side 80-wire cable detection failed, limiting max speed to UDMA33
hdd: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
usbmon: debugfs is not available
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xdfffe000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000f000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000ec00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI Shortcut mode
input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 160k freed
8139too Fast Ethernet driver 0.9.28
eth0: RealTek RTL8139 at 0xf8808000, 00:16:17:f1:f0:e0, IRQ 21
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
nvidia: module license 'NVIDIA' taints kernel.
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 171.06 Wed Feb 20 16:40:08 PST
2008
Adding 4088500k swap on /dev/hda6. Priority:1 extents:1 across:4088500k
EXT3 FS on hda7, internal journal
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
NVRM: request_irq() failed (-38)
eth0: no IPv6 routers present
NVRM: request_irq() failed (-38)
usb 1-8: new high speed USB device using ehci_hcd and address 2
usb 1-8: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
warning: process `nvidia-installe' used the deprecated sysctl system call with
1.23.
warning: process `nvidia-installe' used the deprecated sysctl system call with
1.23.
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 171.06 Wed Feb 20 16:40:08 PST
2008
warning: process `nvidia-installe' used the deprecated sysctl system call with
1.23.
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 171.06 Wed Feb 20 16:40:08 PST
2008
NVRM: request_irq() failed (-38)
usb 1-8: USB disconnect, address 2
---> end dmesg <---
---> begin lspci -v <---
00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
Subsystem: VIA Technologies, Inc. P4M890 Host Bridge
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Capabilities: [50] Power Management version 2
00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
Flags: bus master, medium devsel, latency 0
00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
(prog-if 20 [IO(X)-APIC])
Flags: bus master, fast devsel, latency 0
00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device
Flags: bus master, fast devsel, latency 0
00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
Flags: bus master, medium devsel, latency 0
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00
[Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: dfb00000-dfbfffff
Capabilities: [70] Power Management version 2
00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dc000000-deffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [68] Power Management version 2
Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [88] HyperTransport: MSI Mapping
Capabilities: [98] #0d [0000]
00:03.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: 00000000dfd00000-00000000dfd00000
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [68] Power Management version 2
Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [88] HyperTransport: MSI Mapping
Capabilities: [98] #0d [0000]
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Micro-Star International Co., Ltd. Unknown device 258c
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at fc00 [size=256]
Memory at dffff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
00:0f.0 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7258
Flags: bus master, medium devsel, latency 64
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at f800 [size=16]
Capabilities: [c0] Power Management version 2
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7258
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at f400 [size=32]
Capabilities: [80] Power Management version 2
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7258
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at f000 [size=32]
Capabilities: [80] Power Management version 2
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7258
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at ec00 [size=32]
Capabilities: [80] Power Management version 2
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7258
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20
[EHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 7258
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at dfffe000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR
Motherboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
AC97 Audio Controller (rev 60)
Subsystem: Micro-Star International Co., Ltd. Unknown device b013
Flags: medium devsel, IRQ 22
I/O ports at e400 [size=256]
Capabilities: [c0] Power Management version 2
02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE]
(rev a1) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0274
Flags: bus master, fast devsel, latency 0, IRQ 48
Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at de000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [78] Express Endpoint IRQ 0
---> end lspci -v <---
Hope someone will have the courage to read all this.
\bye
--
Nicolas FRANCOIS | /\
http://nicolas.francois.free.fr | |__|
X--/\\
We are the Micro$oft. _\_V
Resistance is futile.
You will be assimilated. darthvader penguin
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
