Hi Nicolas, if i see right, you use the nvidia 171.06 driver? Why you use an beta driver?
http://www.phoronix.com/scan.php?page=news_item&px=NjM0Mw http://www.phoronix.com/scan.php?page=article&item=987&num=1 Latest stable release was 169.12 mfg Theo Nicolas FRANCOIS schrieb: > Le Mon, 31 Mar 2008 21:36:39 +0200 "Wilco Beekhuizen" > <[EMAIL PROTECTED]> a écrit : > >> Do you have an official Nvidia release from nvidia.com? > > Yes. > >> Have you enabled the drivers for your motherboard in the kernel? > > This, my LFS friend, I don't really know, this is the first time since my > old PII233 that I have a Intel motherboard, having been quite fond of AMD > for a while. > > What I can do is provide the full result of 'dmesg', and the result of > 'lspci -v', for you to be judge. I hope this is not too much for the list. > > ---> begin dmesg <--- > Linux version 2.6.24.2 ([EMAIL PROTECTED]) (gcc version 4.2.3) #1 Mon Mar 31 > 20:05:37 CEST 2008 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) > BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) > BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > 1150MB HIGHMEM available. > 896MB LOWMEM available. > found SMP MP-table at 000f39c0 > Entering add_active_range(0, 0, 524000) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 229376 > HighMem 229376 -> 524000 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 524000 > On node 0 totalpages: 524000 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1760 pages used for memmap > Normal zone: 223520 pages, LIFO batch:31 > HighMem zone: 2301 pages used for memmap > HighMem zone: 292323 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > DMI 2.3 present. > Intel MultiProcessor Specification v1.4 > Virtual Wire compatibility mode. > OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 > Processor #0 6:15 APIC version 17 > Processor #1 6:15 APIC version 17 > WARNING: NR_CPUS limit of 1 reached. Processor ignored. > I/O APIC #4 Version 17 at 0xFEC00000. > I/O APIC #5 Version 17 at 0xFECC0000. > Enabling APIC mode: Flat. Using 2 I/O APICs > Processors: 1 > Allocating PCI resources starting at 80000000 (gap: 7fef0000:60110000) > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519907 > Kernel command line: root=/dev/hda7 > mapped APIC to ffffb000 (fee00000) > mapped IOAPIC to ffffa000 (fec00000) > mapped IOAPIC to ffff9000 (fecc0000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Detected 2194.549 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 2074984k/2096000k available (1772k kernel code, 19928k reserved, 621k > data, 160k init, 1178496k highmem) > virtual kernel memory layout: > fixmap : 0xfffad000 - 0xfffff000 ( 328 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc035a000 - 0xc0382000 ( 160 kB) > .data : 0xc02bb27e - 0xc03567a4 ( 621 kB) > .text : 0xc0100000 - 0xc02bb27e (1772 kB) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 > Calibrating delay using timer specific routine.. 4393.81 BogoMIPS > (lpj=8787635) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 > 0000e39d 00000000 00000001 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 1024K > CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d > 00000000 00000001 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Compat vDSO mapped to ffffe000. > CPU: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d > Checking 'hlt' instruction... OK. > Freeing SMP alternatives: 0k freed > ExtINT not setup in hardware but reported by MP table > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 > net_namespace: 64 bytes > NET: Registered protocol family 16 > PCI: PCI BIOS revision 3.00 entry at 0xfa0a0, last bus=3 > PCI: Using configuration type 1 > Setting up standard PCI resources > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Probing PCI hardware > PCI: Probing PCI hardware (bus 00) > PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 51 > PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 55 > PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:10.1[A] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:10.3[B] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:10.4[C] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:11.5[C] -> IRQ 22 > PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 48 > PCI: Bridge: 0000:00:01.0 > IO window: b000-bfff > MEM window: dfc00000-dfcfffff > PREFETCH window: dfb00000-dfbfffff > PCI: Bridge: 0000:00:02.0 > IO window: d000-dfff > MEM window: dc000000-deffffff > PREFETCH window: c0000000-cfffffff > PCI: Bridge: 0000:00:03.0 > IO window: c000-cfff > MEM window: dfe00000-dfefffff > PREFETCH window: dfd00000-dfdfffff > PCI: Setting latency timer of device 0000:00:01.0 to 64 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > PCI: Setting latency timer of device 0000:00:03.0 to 64 > NET: Registered protocol family 2 > Time: tsc clocksource has been installed. > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 6, 262144 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > Machine check exception polling timer started. > highmem bounce pool size: 64 pages > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: VIA PCI bridge detected. Disabling DAC. > 0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 > PCI: Bypassing VIA 8237 APIC De-Assert Message > Boot video device is 0000:02:00.0 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:02.0:pcie00] > Allocate Port Service[0000:00:02.0:pcie02] > PCI: Setting latency timer of device 0000:00:03.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:03.0:pcie00] > Allocate Port Service[0000:00:03.0:pcie02] > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > loop: module loaded > PPP generic driver version 2.4.2 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:0f.0 > VP_IDE: not 100% native mode: will probe irqs later > VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0 > ide0: BM-DMA at 0xf800-0xf807, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xf808-0xf80f, BIOS settings: hdc:pio, hdd:DMA > Probing IDE interface ide0... > hdb: IRQ probe failed (0xfffffffa) > hdb: IRQ probe failed (0xfffffffa) > hda: MAXTOR STM3320820A, ATA DISK drive > hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/100 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdd: HL-DT-STDVD-RAM GSA-H55N, ATAPI CD/DVD-ROM drive > hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hdd: host side 80-wire cable detection failed, limiting max speed to UDMA33 > hdd: UDMA/33 mode selected > ide1 at 0x170-0x177,0x376 on irq 15 > hda: max request size: 512KiB > hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63 > hda: cache flushes supported > hda: hda1 hda2 < hda5 hda6 hda7 hda8 > > hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache > Uniform CD-ROM driver Revision: 3.20 > usbmon: debugfs is not available > ehci_hcd 0000:00:10.4: EHCI Host Controller > ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:10.4: irq 21, io mem 0xdfffe000 > ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > USB Universal Host Controller Interface driver v3.0 > uhci_hcd 0000:00:10.0: UHCI Host Controller > uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f400 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > uhci_hcd 0000:00:10.1: UHCI Host Controller > uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:10.1: irq 21, io base 0x0000f000 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > uhci_hcd 0000:00:10.2: UHCI Host Controller > uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:10.2: irq 21, io base 0x0000ec00 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > uhci_hcd 0000:00:10.3: UHCI Host Controller > uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e800 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input0 > usbcore: registered new interface driver usbhid > drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > NET: Registered protocol family 15 > Using IPI Shortcut mode > input: ImPS/2 Logitech Wheel Mouse as > /devices/platform/i8042/serio1/input/input1 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 160k freed > 8139too Fast Ethernet driver 0.9.28 > eth0: RealTek RTL8139 at 0xf8808000, 00:16:17:f1:f0:e0, IRQ 21 > eth0: Identified 8139 chip type 'RTL-8100B/8139D' > SCSI subsystem initialized > Driver 'sd' needs updating - please use bus_type methods > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > nvidia: module license 'NVIDIA' taints kernel. > PCI: Setting latency timer of device 0000:02:00.0 to 64 > NVRM: loading NVIDIA UNIX x86 Kernel Module 171.06 Wed Feb 20 16:40:08 PST > 2008 > Adding 4088500k swap on /dev/hda6. Priority:1 extents:1 across:4088500k > EXT3 FS on hda7, internal journal > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > NET: Registered protocol family 10 > NVRM: request_irq() failed (-38) > eth0: no IPv6 routers present > NVRM: request_irq() failed (-38) > usb 1-8: new high speed USB device using ehci_hcd and address 2 > usb 1-8: configuration #1 chosen from 1 choice > scsi0 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 2 > usb-storage: waiting for device to settle before scanning > scsi 0:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2 > sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 > sd 0:0:0:0: [sda] Assuming drive cache: write through > sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 > sd 0:0:0:0: [sda] Assuming drive cache: write through > sda: sda1 > sd 0:0:0:0: [sda] Attached SCSI removable disk > usb-storage: device scan complete > warning: process `nvidia-installe' used the deprecated sysctl system call > with 1.23. > warning: process `nvidia-installe' used the deprecated sysctl system call > with 1.23. > PCI: Setting latency timer of device 0000:02:00.0 to 64 > NVRM: loading NVIDIA UNIX x86 Kernel Module 171.06 Wed Feb 20 16:40:08 PST > 2008 > warning: process `nvidia-installe' used the deprecated sysctl system call > with 1.23. > PCI: Setting latency timer of device 0000:02:00.0 to 64 > NVRM: loading NVIDIA UNIX x86 Kernel Module 171.06 Wed Feb 20 16:40:08 PST > 2008 > NVRM: request_irq() failed (-38) > usb 1-8: USB disconnect, address 2 > ---> end dmesg <--- > > ---> begin lspci -v <--- > 00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge > Subsystem: VIA Technologies, Inc. P4M890 Host Bridge > Flags: bus master, 66MHz, medium devsel, latency 8 > Memory at d0000000 (32-bit, prefetchable) [size=128M] > Capabilities: [80] AGP version 3.5 > Capabilities: [50] Power Management version 2 > > 00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge > Flags: bus master, medium devsel, latency 0 > > 00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge > Flags: bus master, medium devsel, latency 0 > > 00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge > Flags: bus master, medium devsel, latency 0 > > 00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge > Flags: bus master, medium devsel, latency 0 > > 00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller > (prog-if 20 [IO(X)-APIC]) > Flags: bus master, fast devsel, latency 0 > > 00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device > Flags: bus master, fast devsel, latency 0 > > 00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge > Flags: bus master, medium devsel, latency 0 > > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 > [Normal decode]) > Flags: bus master, 66MHz, medium devsel, latency 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000b000-0000bfff > Memory behind bridge: dfc00000-dfcfffff > Prefetchable memory behind bridge: dfb00000-dfbfffff > Capabilities: [70] Power Management version 2 > > 00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge > Controller (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: dc000000-deffffff > Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000 > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Capabilities: [68] Power Management version 2 > Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 > Enable- > Capabilities: [88] HyperTransport: MSI Mapping > Capabilities: [98] #0d [0000] > > 00:03.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge > Controller (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: dfe00000-dfefffff > Prefetchable memory behind bridge: 00000000dfd00000-00000000dfd00000 > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Capabilities: [68] Power Management version 2 > Capabilities: [70] Message Signalled Interrupts: 64bit+ Queue=0/0 > Enable- > Capabilities: [88] HyperTransport: MSI Mapping > Capabilities: [98] #0d [0000] > > 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > Subsystem: Micro-Star International Co., Ltd. Unknown device 258c > Flags: bus master, medium devsel, latency 64, IRQ 21 > I/O ports at fc00 [size=256] > Memory at dffff000 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > > 00:0f.0 IDE interface: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a > [Master SecP PriP]) > Subsystem: Micro-Star International Co., Ltd. Unknown device 7258 > Flags: bus master, medium devsel, latency 64 > [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] > [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] > [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] > [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] > I/O ports at f800 [size=16] > Capabilities: [c0] Power Management version 2 > > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) (prog-if 00 [UHCI]) > Subsystem: Micro-Star International Co., Ltd. Unknown device 7258 > Flags: bus master, medium devsel, latency 64, IRQ 21 > I/O ports at f400 [size=32] > Capabilities: [80] Power Management version 2 > > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) (prog-if 00 [UHCI]) > Subsystem: Micro-Star International Co., Ltd. Unknown device 7258 > Flags: bus master, medium devsel, latency 64, IRQ 21 > I/O ports at f000 [size=32] > Capabilities: [80] Power Management version 2 > > 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) (prog-if 00 [UHCI]) > Subsystem: Micro-Star International Co., Ltd. Unknown device 7258 > Flags: bus master, medium devsel, latency 64, IRQ 21 > I/O ports at ec00 [size=32] > Capabilities: [80] Power Management version 2 > > 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 81) (prog-if 00 [UHCI]) > Subsystem: Micro-Star International Co., Ltd. Unknown device 7258 > Flags: bus master, medium devsel, latency 64, IRQ 21 > I/O ports at e800 [size=32] > Capabilities: [80] Power Management version 2 > > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 > [EHCI]) > Subsystem: Micro-Star International Co., Ltd. Unknown device 7258 > Flags: bus master, medium devsel, latency 64, IRQ 21 > Memory at dfffe000 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge > [KT600/K8T800/K8T890 South] > Subsystem: VIA Technologies, Inc. DFI KT600-AL / Soltek SL-B9D-FGR > Motherboard > Flags: bus master, stepping, medium devsel, latency 0 > Capabilities: [c0] Power Management version 2 > > 00:11.5 Multimedia audio controller: VIA Technologies, Inc. > VT8233/A/8235/8237 AC97 Audio Controller (rev 60) > Subsystem: Micro-Star International Co., Ltd. Unknown device b013 > Flags: medium devsel, IRQ 22 > I/O ports at e400 [size=256] > Capabilities: [c0] Power Management version 2 > > 02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] > (rev a1) (prog-if 00 [VGA controller]) > Subsystem: Micro-Star International Co., Ltd. Unknown device 0274 > Flags: bus master, fast devsel, latency 0, IRQ 48 > Memory at dc000000 (32-bit, non-prefetchable) [size=16M] > Memory at c0000000 (64-bit, prefetchable) [size=256M] > Memory at dd000000 (64-bit, non-prefetchable) [size=16M] > [virtual] Expansion ROM at de000000 [disabled] [size=128K] > Capabilities: [60] Power Management version 2 > Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 > Enable- > Capabilities: [78] Express Endpoint IRQ 0 > ---> end lspci -v <--- > > Hope someone will have the courage to read all this. > > \bye > -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
