Hi I encountered this problem when running cmake on kdeadmin-4.4.2:-
------------------------------------------------------------------------- -- -- -- The following OPTIONAL packages could NOT be located on your system. -- Consider installing them to enable more features from this software. ------------------------------------------------------------------------- -- -- * PyCups <http://cyberelk.net/tim/software/pycups/> PyCups was not found. It is needed by system-config-printer-kde to run. (Use -DINSTALL_SYSTEM_CONFIG_PRINTER=TRUE to install anyway) * system-config-printer> <http://cyberelk.net/tim/software/system-config-printer/> system-config-printer was not found. Some of its modules (cupshelpers.py, config.py, smburi.py and debug.py) are required by system-config-printer-kde. ------------------------------------------------------------------------- -- But these are installed:- ####### for pycups (installed is version 1.9.49) - a recent version root [ /usr/lib/python2.6/site-packages ]# root [ /usr/lib/python2.6/site-packages ]# root [ /usr/lib/python2.6/site-packages ]# ls cups* cups-1.0-py2.6.egg-info cups.so root [ /usr/lib/python2.6/site-packages ]# #### for system config printer (installed is version 1.2.1- ) -the latest available [ /usr/share/system-config-printer ]# ls -l total 924 -rw-r--r-- 1 root root 19177 Apr 17 21:29 applet.glade -rwxr-xr-x 1 root root 11891 Apr 17 21:29 applet.py -rw-r--r-- 1 root root 8756 Apr 17 21:29 authconn.py -rw-r--r-- 1 root root 1766 Apr 17 21:29 config.py -rw-r--r-- 1 root root 6427 Apr 17 21:29 contextmenu.py -rw-r--r-- 1 root root 25074 Apr 17 21:29 cupshelpers.py -rw-r--r-- 1 root root 1703 Apr 17 21:29 debug.py -rw-r--r-- 1 root root 3374 Apr 17 21:29 errordialogs.py -rw-r--r-- 1 root root 1651 Apr 17 21:29 gtk_label_autowrap.py -rw-r--r-- 1 root root 8046 Apr 17 21:29 gtk_treeviewtooltips.py drwxr-xr-x 2 root root 4096 Apr 17 21:29 icons -rw-r--r-- 1 root root 39096 Apr 17 21:29 jobviewer.py -rw-r--r-- 1 root root 21724 Apr 17 21:29 monitor.py -rwxr-xr-x 1 root root 9259 Apr 17 21:29 my-default-printer.py -rw-r--r-- 1 root root 14601 Apr 17 21:29 openprinting.py -rw-r--r-- 1 root root 12898 Apr 17 21:29 options.py -rw-r--r-- 1 root root 7424 Apr 17 21:29 optionwidgets.py -rwxr-xr-x 1 root root 31054 Apr 17 21:29 ppds.py -rw-r--r-- 1 root root 3678 Apr 17 21:29 probe_printer.py -rwxr-xr-x 1 root root 13780 Apr 17 21:29 pysmb.py -rw-r--r-- 1 root root 3027 Apr 17 21:29 smburi.py -rw-r--r-- 1 root root 5064 Apr 17 21:29 statereason.py -rw-r--r-- 1 root root 443717 Apr 17 21:29 system-config-printer.glade -rwxr-xr-x 1 root root 189264 Apr 17 21:29 system-config-printer.py drwxr-xr-x 2 root root 4096 Apr 17 21:29 troubleshoot root [ /usr/share/system-config-printer ]# Any ideas here, tried changing .py files etc MAC -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
