On 04/25/10 15:03, [email protected] wrote: > > > -----Original Message----- > From: James Richard Tyrer <[email protected]> > To: BLFS Support List <[email protected]> > Cc: [email protected] > Sent: Sun, Apr 25, 2010 9:38 pm > Subject: Re: Problem in cmake on kdeadmin-4.4.2 > > On 04/25/10 09:03, [email protected] wrote: >> >> >> -----Original Message----- >> From: James Richard Tyrer <[email protected]> >> To: BLFS Support List <[email protected]> >> Sent: Sun, Apr 25, 2010 4:37 pm >> Subject: Re: Problem in cmake on kdeadmin-4.4.2 >> >> On 04/25/10 07:35, [email protected] wrote: >>> -----Original Message----- From: James Richard Tyrer<[email protected]> >> >>>> The actual finding is done by a Python script: "FindPyCups.py" in: >>> >>>> .../kdeadmin/system-config-printer-kde/cmake-modules >>> >>>> I would try running that manually. Change to that directory and: >>> >>>> python FindPyCups.py >>> >>>> If I read it correctly, it prints: "Groovy" to standard output if >>>> it >>> is >>>> found. If not, the easiest way to check to see that PyCups is >>> installed >>>> correctly is to install it again. >>> >>> Doing this returns me to prompt, with no response >>> >>> OK, that is the problem. PyCups is not installed correctly >> >> Maybe, but see below. echo $? returned 1 by the way. >> >>> Maybe i need to install Pycups elsewhere as suggested by lux-integ? >>> >>> AFAIK, you can't do that. It will automatically be installed with the >>> same prefix as Python. >> >>> I've tried editing FindSystemConfigPrinter.py with >>> path/to/python/site-packages/cupshelpers - this doesn't help with >>> system-config-printer either. >>> >>> That isn't going to help if the Python script doesn't find (py)cups. >> >>> So, I would try installing PyCups again >> >> Thanks James, done that twice now and the same two files, cups.so and >> cups-1.0-py2.6.egg-info are installed under >> /usr/lib/python2.6/site-packages. These are the only two expected I >> assume? A file list on the web says yes. >> >> This makes little sense. It may be related to having Python installed >> in: "/usr/local" but Python should know where it is installed. But, >> perhaps, some symbolic links to: "/usr" could help > > No luck here, even tried a new FindPyCups.cmake script with advice from > lux-integ but no go > > >/usr/bin/python -> /usr/local/bin/python > >/usr/lib/python -> /usr/local/lib/python > >/usr/include/python -> /usr/local/include/python > >> IIRC, I had to do that when I still had Python installed in: > "/usr/local". > >> If it was CMake that couldn't find something, you can set the two > CMake >> environment variables that very roughly correspond to the normal ones >> for AutoTools (but ONLY for specifying paths!): > > > CPPFLAGS CMAKE_INCLUDE_PATH > > LD_FLAGS CMAKE_LIBRARY_PATH > > Also tried this, but cmake will not find cups.so > I am running out of ideas. :-(
Is it possible that PyCups requires other Python addons that you don't have installed? -- James Tyrer Linux (mostly) From Scratch -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
