I installed the latest git versions of libdrm, mesalib and the kernel modules
from the nouveau wiki site.
I blacklisted the nouveau module so I could boot the machine. KMS is therefore
enabled.
When I do modprobe nouveau or startx I still get the cycling of the colored
screens.
startx now gives me a Xorg.0.log which I attach here.
I wonder if someone (Armin?) could take a look at it and see if there's
anything untoward about it.
Thanks
jb.
[ 88.002]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 88.002] X Protocol Version 11, Revision 0
[ 88.002] Build Operating System: Linux 3.2.0-26-generic-pae i686
[ 88.003] Current Operating System: Linux M1730 3.5.0-rc5+ #1 SMP Thu Jul 12 12:07:43 CDT 2012 i686
[ 88.003] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-rc5+ root=/dev/sda8 ro
[ 88.003] Build Date: 11 July 2012 05:41:42PM
[ 88.003]
[ 88.003] Current version of pixman: 0.26.2
[ 88.004] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 88.004] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 88.006] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 14 11:38:55 2012
[ 88.066] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 88.085] (==) No Layout section. Using the first Screen section.
[ 88.085] (==) No screen section available. Using defaults.
[ 88.085] (**) |-->Screen "Default Screen Section" (0)
[ 88.085] (**) | |-->Monitor "<default monitor>"
[ 88.085] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 88.085] (==) Automatically adding devices
[ 88.085] (==) Automatically enabling devices
[ 88.159] (==) FontPath set to:
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/TTF/,
/usr/share/fonts/X11/OTF/,
/usr/share/fonts/X11/Type1/,
/usr/share/fonts/X11/100dpi/,
/usr/share/fonts/X11/75dpi/
[ 88.159] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 88.159] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 88.159] (II) Loader magic: 0x821da00
[ 88.159] (II) Module ABI versions:
[ 88.159] X.Org ANSI C Emulation: 0.4
[ 88.160] X.Org Video Driver: 12.0
[ 88.160] X.Org XInput driver : 16.0
[ 88.160] X.Org Server Extension : 6.0
[ 88.161] (--) PCI:*(0:3:0:0) 10de:0409:1028:019c rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
[ 88.161] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 88.161] (II) LoadModule: "extmod"
[ 88.163] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 88.172] (II) Module extmod: vendor="X.Org Foundation"
[ 88.172] compiled for 1.12.3, module version = 1.0.0
[ 88.172] Module class: X.Org Server Extension
[ 88.172] ABI class: X.Org Server Extension, version 6.0
[ 88.172] (II) Loading extension MIT-SCREEN-SAVER
[ 88.172] (II) Loading extension XFree86-VidModeExtension
[ 88.172] (II) Loading extension XFree86-DGA
[ 88.172] (II) Loading extension DPMS
[ 88.172] (II) Loading extension XVideo
[ 88.172] (II) Loading extension XVideo-MotionCompensation
[ 88.172] (II) Loading extension X-Resource
[ 88.172] (II) LoadModule: "dbe"
[ 88.172] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 88.181] (II) Module dbe: vendor="X.Org Foundation"
[ 88.181] compiled for 1.12.3, module version = 1.0.0
[ 88.181] Module class: X.Org Server Extension
[ 88.181] ABI class: X.Org Server Extension, version 6.0
[ 88.181] (II) Loading extension DOUBLE-BUFFER
[ 88.181] (II) LoadModule: "glx"
[ 88.181] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 88.190] (II) Module glx: vendor="X.Org Foundation"
[ 88.190] compiled for 1.12.3, module version = 1.0.0
[ 88.190] ABI class: X.Org Server Extension, version 6.0
[ 88.190] (==) AIGLX enabled
[ 88.190] (II) Loading extension GLX
[ 88.190] (II) LoadModule: "record"
[ 88.191] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 88.194] (II) Module record: vendor="X.Org Foundation"
[ 88.194] compiled for 1.12.3, module version = 1.13.0
[ 88.194] Module class: X.Org Server Extension
[ 88.194] ABI class: X.Org Server Extension, version 6.0
[ 88.194] (II) Loading extension RECORD
[ 88.194] (II) LoadModule: "dri"
[ 88.194] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 88.226] (II) Module dri: vendor="X.Org Foundation"
[ 88.226] compiled for 1.12.3, module version = 1.0.0
[ 88.226] ABI class: X.Org Server Extension, version 6.0
[ 88.226] (II) Loading extension XFree86-DRI
[ 88.226] (II) LoadModule: "dri2"
[ 88.226] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 88.227] (II) Module dri2: vendor="X.Org Foundation"
[ 88.227] compiled for 1.12.3, module version = 1.2.0
[ 88.227] ABI class: X.Org Server Extension, version 6.0
[ 88.227] (II) Loading extension DRI2
[ 88.227] (==) Matched nouveau as autoconfigured driver 0
[ 88.227] (==) Matched nv as autoconfigured driver 1
[ 88.227] (==) Matched vesa as autoconfigured driver 2
[ 88.227] (==) Matched fbdev as autoconfigured driver 3
[ 88.227] (==) Assigned the driver to the xf86ConfigLayout
[ 88.227] (II) LoadModule: "nouveau"
[ 88.227] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 88.251] (II) Module nouveau: vendor="X.Org Foundation"
[ 88.251] compiled for 1.12.3, module version = 1.0.1
[ 88.251] Module class: X.Org Video Driver
[ 88.251] ABI class: X.Org Video Driver, version 12.0
[ 88.259] (II) LoadModule: "nv"
[ 88.259] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 88.270] (II) Module nv: vendor="X.Org Foundation"
[ 88.270] compiled for 1.12.3, module version = 2.1.18
[ 88.270] Module class: X.Org Video Driver
[ 88.270] ABI class: X.Org Video Driver, version 12.0
[ 88.270] (II) LoadModule: "vesa"
[ 88.270] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 88.275] (II) Module vesa: vendor="X.Org Foundation"
[ 88.275] compiled for 1.12.3, module version = 2.3.1
[ 88.275] Module class: X.Org Video Driver
[ 88.275] ABI class: X.Org Video Driver, version 12.0
[ 88.275] (II) LoadModule: "fbdev"
[ 88.276] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 88.286] (II) Module fbdev: vendor="X.Org Foundation"
[ 88.286] compiled for 1.12.3, module version = 0.4.2
[ 88.286] ABI class: X.Org Video Driver, version 12.0
[ 88.286] (II) NOUVEAU driver Date: Fri Jul 6 16:23:50 2012 +1000
[ 88.286] (II) NOUVEAU driver for NVIDIA chipset families :
[ 88.286] RIVA TNT (NV04)
[ 88.287] RIVA TNT2 (NV05)
[ 88.287] GeForce 256 (NV10)
[ 88.287] GeForce 2 (NV11, NV15)
[ 88.287] GeForce 4MX (NV17, NV18)
[ 88.287] GeForce 3 (NV20)
[ 88.287] GeForce 4Ti (NV25, NV28)
[ 88.287] GeForce FX (NV3x)
[ 88.287] GeForce 6 (NV4x)
[ 88.287] GeForce 7 (G7x)
[ 88.287] GeForce 8 (G8x)
[ 88.287] GeForce GTX 200 (NVA0)
[ 88.287] GeForce GTX 400 (NVC0)
[ 88.287] (II) NOUVEAU driver Date: Fri Jul 6 16:23:50 2012 +1000
[ 88.287] (II) NOUVEAU driver for NVIDIA chipset families :
[ 88.287] RIVA TNT (NV04)
[ 88.287] RIVA TNT2 (NV05)
[ 88.287] GeForce 256 (NV10)
[ 88.287] GeForce 2 (NV11, NV15)
[ 88.287] GeForce 4MX (NV17, NV18)
[ 88.287] GeForce 3 (NV20)
[ 88.287] GeForce 4Ti (NV25, NV28)
[ 88.287] GeForce FX (NV3x)
[ 88.287] GeForce 6 (NV4x)
[ 88.287] GeForce 7 (G7x)
[ 88.287] GeForce 8 (G8x)
[ 88.287] GeForce GTX 200 (NVA0)
[ 88.287] GeForce GTX 400 (NVC0)
[ 88.287] (II) VESA: driver for VESA chipsets: vesa
[ 88.287] (II) FBDEV: driver for framebuffer: fbdev
[ 88.287] (--) using VT number 7
[ 88.291] drmOpenDevice: node name is /dev/dri/card0
[ 88.293] drmOpenDevice: open result is -1, (No such device or address)
[ 88.295] drmOpenDevice: open result is -1, (No such device or address)
[ 88.295] drmOpenDevice: Open failed
[ 89.935] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
[ 89.935] drmOpenDevice: node name is /dev/dri/card0
[ 89.935] drmOpenDevice: open result is 9, (OK)
[ 89.936] drmOpenByBusid: drmOpenMinor returns 9
[ 89.936] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
[ 89.936] (II) [drm] nouveau interface version: 1.0.0
[ 89.936] (WW) Falling back to old probe method for vesa
[ 89.936] (WW) Falling back to old probe method for fbdev
[ 89.936] (II) Loading sub module "fbdevhw"
[ 89.936] (II) LoadModule: "fbdevhw"
[ 89.936] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 89.962] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 89.962] compiled for 1.12.3, module version = 0.0.2
[ 89.962] ABI class: X.Org Video Driver, version 12.0
[ 89.962] (II) Loading sub module "dri"
[ 89.962] (II) LoadModule: "dri"
[ 89.962] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 89.962] (II) Module dri: vendor="X.Org Foundation"
[ 89.963] compiled for 1.12.3, module version = 1.0.0
[ 89.963] ABI class: X.Org Server Extension, version 6.0
[ 89.963] (II) NOUVEAU(0): Loaded DRI module
[ 89.963] drmOpenDevice: node name is /dev/dri/card0
[ 89.963] drmOpenDevice: open result is 10, (OK)
[ 89.963] drmOpenDevice: node name is /dev/dri/card0
[ 89.963] drmOpenDevice: open result is 10, (OK)
[ 89.963] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
[ 89.963] drmOpenDevice: node name is /dev/dri/card0
[ 89.963] drmOpenDevice: open result is 10, (OK)
[ 89.963] drmOpenByBusid: drmOpenMinor returns 10
[ 89.963] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
[ 89.963] (II) [drm] DRM interface version 1.4
[ 89.963] (II) [drm] DRM open master succeeded.
[ 89.963] (--) NOUVEAU(0): Chipset: "NVIDIA NV84"
[ 89.963] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 89.963] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 89.963] (==) NOUVEAU(0): RGB weight 888
[ 89.963] (==) NOUVEAU(0): Default visual is TrueColor
[ 89.963] (==) NOUVEAU(0): Using HW cursor
[ 89.963] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 89.963] (==) NOUVEAU(0): Page flipping enabled
[ 89.963] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 90.011] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 90.105] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 90.134] (II) NOUVEAU(0): EDID for output LVDS-1
[ 90.134] (II) NOUVEAU(0): Manufacturer: SEC Model: 5443 Serial#: 0
[ 90.134] (II) NOUVEAU(0): Year: 2007 Week: 0
[ 90.134] (II) NOUVEAU(0): EDID Version: 1.3
[ 90.134] (II) NOUVEAU(0): Digital Display Input
[ 90.134] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 90.134] (II) NOUVEAU(0): Gamma: 2.20
[ 90.134] (II) NOUVEAU(0): No DPMS capabilities specified
[ 90.134] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 90.134] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 90.134] (II) NOUVEAU(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 90.134] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 90.134] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 90.134] (II) NOUVEAU(0): Supported detailed timing:
[ 90.134] (II) NOUVEAU(0): clock: 166.4 MHz Image Size: 367 x 230 mm
[ 90.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2228 h_border: 0
[ 90.134] (II) NOUVEAU(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1245 v_border: 0
[ 90.134] (II) NOUVEAU(0): Unknown vendor-specific block f
[ 90.134] (II) NOUVEAU(0): PP653
[ 90.134] (II) NOUVEAU(0): 1:Ca³ÿ
[ 90.134] (II) NOUVEAU(0): EDID (in hex):
[ 90.135] (II) NOUVEAU(0): 00ffffffffffff004ca3435400000000
[ 90.135] (II) NOUVEAU(0): 00110103802517780a87f594574f8c27
[ 90.135] (II) NOUVEAU(0): 27505400000001010101010101010101
[ 90.135] (II) NOUVEAU(0): 0101010101010441803471b02d403020
[ 90.135] (II) NOUVEAU(0): 36006fe6100000190000000f00000000
[ 90.135] (II) NOUVEAU(0): 000000000046d2026400000000fe0050
[ 90.135] (II) NOUVEAU(0): 503635330031373043540a20000000fe
[ 90.135] (II) NOUVEAU(0): 0020313a436188b3ff06010a20200084
[ 90.135] (II) NOUVEAU(0): EDID vendor "SEC", prod id 21571
[ 90.135] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 90.135] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 166.44 1920 1968 2000 2228 1200 1203 1209 1245 -hsync -vsync (74.7 kHz eP)
[ 90.135] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 90.135] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 166.44 1920 1968 2000 2228 1200 1203 1209 1245 -hsync -vsync (74.7 kHz eP)
[ 90.135] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 90.135] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 90.229] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 90.229] (II) NOUVEAU(0): Output LVDS-1 connected
[ 90.229] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 90.229] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 90.229] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1920x1200
[ 90.229] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 90.229] (--) NOUVEAU(0): Virtual size is 1920x1200 (pitch 0)
[ 90.229] (**) NOUVEAU(0): Driver mode "1920x1200": 166.4 MHz (scaled from 0.0 MHz), 74.7 kHz, 60.0 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 166.44 1920 1968 2000 2228 1200 1203 1209 1245 -hsync -vsync (74.7 kHz eP)
[ 90.229] (**) NOUVEAU(0): Driver mode "1920x1200": 193.2 MHz (scaled from 0.0 MHz), 74.6 kHz, 59.9 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "1600x1200": 161.0 MHz (scaled from 0.0 MHz), 74.5 kHz, 59.9 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "1280x1024": 109.0 MHz (scaled from 0.0 MHz), 63.7 kHz, 59.9 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "1280x960": 101.2 MHz (scaled from 0.0 MHz), 59.7 kHz, 59.9 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 90.229] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 90.229] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 90.229] (**) NOUVEAU(0): Display dimensions: (370, 230) mm
[ 90.229] (**) NOUVEAU(0): DPI set to (131, 132)
[ 90.229] (II) Loading sub module "fb"
[ 90.229] (II) LoadModule: "fb"
[ 90.230] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 90.251] (II) Module fb: vendor="X.Org Foundation"
[ 90.251] compiled for 1.12.3, module version = 1.0.0
[ 90.251] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90.251] (II) Loading sub module "exa"
[ 90.251] (II) LoadModule: "exa"
[ 90.251] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 90.259] (II) Module exa: vendor="X.Org Foundation"
[ 90.259] compiled for 1.12.3, module version = 2.5.0
[ 90.259] ABI class: X.Org Video Driver, version 12.0
[ 90.259] (II) Loading sub module "shadowfb"
[ 90.259] (II) LoadModule: "shadowfb"
[ 90.259] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 90.260] (II) Module shadowfb: vendor="X.Org Foundation"
[ 90.260] compiled for 1.12.3, module version = 1.0.0
[ 90.260] ABI class: X.Org ANSI C Emulation, version 0.4
[ 90.260] (II) UnloadModule: "nv"
[ 90.260] (II) Unloading nv
[ 90.260] (II) UnloadModule: "vesa"
[ 90.260] (II) Unloading vesa
[ 90.260] (II) UnloadModule: "fbdev"
[ 90.260] (II) Unloading fbdev
[ 90.260] (II) UnloadSubModule: "fbdevhw"
[ 90.260] (II) Unloading fbdevhw
[ 90.260] (--) Depth 24 pixmap format is 32 bpp
[ 90.261] (II) NOUVEAU(0): Opened GPU channel 2
[ 90.268] (II) NOUVEAU(0): [DRI2] Setup complete
[ 90.268] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 90.268] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 90.278] (II) EXA(0): Driver allocated offscreen pixmaps
[ 90.278] (II) EXA(0): Driver registered support for the following operations:
[ 90.278] (II) Solid
[ 90.278] (II) Copy
[ 90.278] (II) Composite (RENDER acceleration)
[ 90.278] (II) UploadToScreen
[ 90.278] (II) DownloadFromScreen
[ 90.278] (==) NOUVEAU(0): Backing store disabled
[ 90.278] (==) NOUVEAU(0): Silken mouse enabled
[ 90.278] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 90.278] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 90.278] (==) NOUVEAU(0): DPMS enabled
[ 90.278] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 90.278] (--) RandR disabled
[ 90.278] (II) Initializing built-in extension Generic Event Extension
[ 90.278] (II) Initializing built-in extension SHAPE
[ 90.278] (II) Initializing built-in extension MIT-SHM
[ 90.278] (II) Initializing built-in extension XInputExtension
[ 90.278] (II) Initializing built-in extension XTEST
[ 90.278] (II) Initializing built-in extension BIG-REQUESTS
[ 90.278] (II) Initializing built-in extension SYNC
[ 90.278] (II) Initializing built-in extension XKEYBOARD
[ 90.278] (II) Initializing built-in extension XC-MISC
[ 90.278] (II) Initializing built-in extension XINERAMA
[ 90.278] (II) Initializing built-in extension XFIXES
[ 90.278] (II) Initializing built-in extension RENDER
[ 90.278] (II) Initializing built-in extension RANDR
[ 90.278] (II) Initializing built-in extension COMPOSITE
[ 90.278] (II) Initializing built-in extension DAMAGE
[ 90.632] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 90.632] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 90.632] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 90.632] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 90.632] (II) AIGLX: Loaded and initialized nouveau
[ 90.632] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 90.646] (II) NOUVEAU(0): NVEnterVT is called.
[ 90.679] (II) NOUVEAU(0): Setting screen physical size to 507 x 317
[ 90.679] resize called 1920 1200
[ 91.143] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 91.143] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 91.143] (II) LoadModule: "evdev"
[ 91.143] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 91.152] (II) Module evdev: vendor="X.Org Foundation"
[ 91.152] compiled for 1.12.3, module version = 2.7.0
[ 91.152] Module class: X.Org XInput Driver
[ 91.152] ABI class: X.Org XInput driver, version 16.0
[ 91.152] (II) Using input driver 'evdev' for 'Video Bus'
[ 91.152] (**) Video Bus: always reports core events
[ 91.152] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 91.152] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 91.152] (--) evdev: Video Bus: Found keys
[ 91.152] (II) evdev: Video Bus: Configuring as keyboard
[ 91.152] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/device:2f/device:30/LNXVIDEO:00/input/input3/event3"
[ 91.152] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 91.152] (**) Option "xkb_rules" "evdev"
[ 91.152] (**) Option "xkb_model" "evdev"
[ 91.152] (**) Option "xkb_layout" "us"
[ 91.176] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 91.176] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 91.176] (II) Using input driver 'evdev' for 'Power Button'
[ 91.176] (**) Power Button: always reports core events
[ 91.176] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 91.176] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 91.176] (--) evdev: Power Button: Found keys
[ 91.176] (II) evdev: Power Button: Configuring as keyboard
[ 91.176] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 91.176] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 91.176] (**) Option "xkb_rules" "evdev"
[ 91.176] (**) Option "xkb_model" "evdev"
[ 91.176] (**) Option "xkb_layout" "us"
[ 91.176] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 91.176] (II) No input driver specified, ignoring this device.
[ 91.176] (II) This device may have been added with another device file.
[ 91.177] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 91.177] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 91.177] (II) Using input driver 'evdev' for 'Sleep Button'
[ 91.177] (**) Sleep Button: always reports core events
[ 91.177] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 91.177] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 91.177] (--) evdev: Sleep Button: Found keys
[ 91.177] (II) evdev: Sleep Button: Configuring as keyboard
[ 91.177] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 91.177] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 91.177] (**) Option "xkb_rules" "evdev"
[ 91.177] (**) Option "xkb_model" "evdev"
[ 91.177] (**) Option "xkb_layout" "us"
[ 91.177] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 91.177] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 91.177] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 91.177] (**) Logitech USB Receiver: always reports core events
[ 91.177] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 91.177] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc510
[ 91.177] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 91.177] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 91.177] (--) evdev: Logitech USB Receiver: Found relative axes
[ 91.177] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 91.177] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 91.177] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 91.177] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 91.177] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 91.177] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6/event6"
[ 91.177] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[ 91.178] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 91.178] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 91.178] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 91.178] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 91.178] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 91.178] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 91.178] (II) No input driver specified, ignoring this device.
[ 91.178] (II) This device may have been added with another device file.
[ 91.178] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 91.178] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 91.178] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 91.178] (**) AT Translated Set 2 keyboard: always reports core events
[ 91.178] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 91.178] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 91.178] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 91.178] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 91.178] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 91.178] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 91.178] (**) Option "xkb_rules" "evdev"
[ 91.178] (**) Option "xkb_model" "evdev"
[ 91.178] (**) Option "xkb_layout" "us"
[ 91.179] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 91.179] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 91.179] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 91.179] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 91.179] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event5"
[ 91.179] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 91.179] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 91.179] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 91.179] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 91.179] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 91.179] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 91.179] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 91.179] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 91.179] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 91.179] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 91.179] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 91.179] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 91.179] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 91.179] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 91.179] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 91.179] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 91.179] (II) No input driver specified, ignoring this device.
[ 91.179] (II) This device may have been added with another device file.
[ 93.343] (II) NOUVEAU(0): EDID vendor "SEC", prod id 21571
[ 93.343] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 93.343] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 166.44 1920 1968 2000 2228 1200 1203 1209 1245 -hsync -vsync (74.7 kHz eP)
[ 95.911] (II) NOUVEAU(0): EDID vendor "SEC", prod id 21571
[ 95.911] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 95.911] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 166.44 1920 1968 2000 2228 1200 1203 1209 1245 -hsync -vsync (74.7 kHz eP)
[ 97.744] (II) NOUVEAU(0): EDID vendor "SEC", prod id 21571
[ 97.744] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 97.744] (II) NOUVEAU(0): Modeline "1920x1200"x0.0 166.44 1920 1968 2000 2228 1200 1203 1209 1245 -hsync -vsync (74.7 kHz eP)
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
