John Burrell wrote: > Thanks for your input. All the items you mention were covered at some > point in the discussion. Armin confirmed that all the software > components associated with the nouveau driver were performing as > expected - at least as far as he could tell from the logs. There > didn't seem to be anything wrong with the installation.There seems to > be something wrong with the way the nouveau driver communicates with > my particular GPU. The card doesn't appear to recognize the signal(s) > that are sent to it and without a signal it will simply cycle through > red, green blue and white. > > The nouveau site says that drm.ko must be loaded before nouveau.ko > so I was going to check that this happens in my case.
I've been following this and think you should be confirming it is not a hardware issue. I would test the nv and the proprietary drivers. If they work, then go back and look at nouveau again. -- Bruce -- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
