On 31.8.2012 21:53, Cliff McDiarmid wrote:
>
> Hi
>
> Hope this is readable
>
>
>>Your problem might be related to this:
>
>>SIOCSIFFLAGS: Operation not possible due to RF-kill
>
> I think this message was refering to my in-built wireless on wlan0 being 
> switched off.  If I switch it on and run wpa_supplicant to connect on 
> wlan1(USB wired)
> I get this from rfkill:
>
> 0: phy0: Wireless LAN
>          Soft blocked: no
>          Hard blocked: no
> 3: hci0: Bluetooth
>          Soft blocked: no
>          Hard blocked: no
>
> AND I'm still not connecting on wlan1.
>
> I've even tried ndiswrapper with the windoze driver which loads perfectly, 
> but I still get the same output:
>
> Listening on LPF/wlan0/00:27:10:c9:9f:58
> Sending on   LPF/wlan0/00:27:10:c9:9f:58
> Listening on LPF/wlan1/00:1a:ef:25:0a:56
> Sending on   LPF/wlan1/00:1a:ef:25:0a:56
> Sending on   Socket/fallback
> DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 5
> receive_packet failed on wlan0: Network is down
> DHCPREQUEST on wlan0 to 255.255.255.255 port 67
> send_packet: Network is down
> DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 13
> DHCPREQUEST on wlan0 to 255.255.255.255 port 67
> receive_packet failed on wlan0: Network is down
> receive_packet failed on wlan0: Network is down
> receive_packet failed on wlan0: Network is down
> receive_packet failed on wlan0: Network is down
> DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 20
> DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
> DHCPOFFER from 192.168.1.254
> DHCPREQUEST on wlan0 to 255.255.255.255 port 67
> DHCPACK from 192.168.1.254
> SIOCADDRT: File exists
> bound to 192.168.1.68 -- renewal in 41637 seconds.
>
> thanks
>
> MAC
>

Ugh, It looks like you are just running "dhclient" without any interface 
name! Try just "dhclient -v wlan1" and see if it works, because you are 
getting some dhcp lease as far as I can see.
-- 
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page

Reply via email to