----- Original Message ----- From: Armin K. Sent: 08/31/12 08:17 PM To: BLFS Support List Subject: Re: [blfs-support] USB wireless problems
On 31.8.2012 21:53, Cliff McDiarmid wrote: > > Hi > > Hope this is readable > > >>Your problem might be related to this: > >>SIOCSIFFLAGS: Operation not possible due to RF-kill > > I think this message was refering to my in-built wireless on wlan0 being switched off. If I switch it on and run wpa_supplicant to connect on wlan1(USB wired) > I get this from rfkill: > > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > 3: hci0: Bluetooth > Soft blocked: no > Hard blocked: no > > AND I'm still not connecting on wlan1. > > I've even tried ndiswrapper with the windoze driver which loads perfectly, but I still get the same output: > > Listening on LPF/wlan0/00:27:10:c9:9f:58 > Sending on LPF/wlan0/00:27:10:c9:9f:58 > Listening on LPF/wlan1/00:1a:ef:25:0a:56 > Sending on LPF/wlan1/00:1a:ef:25:0a:56 > Sending on Socket/fallback > DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 5 > receive_packet failed on wlan0: Network is down > DHCPREQUEST on wlan0 to 255.255. 255.255 port 67 > send_packet: Network is down > DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 13 > DHCPREQUEST on wlan0 to 255.255.255.255 port 67 > receive_packet failed on wlan0: Network is down > receive_packet failed on wlan0: Network is down > receive_packet failed on wlan0: Network is down > receive_packet failed on wlan0: Network is down > DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 20 > DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 > DHCPOFFER from 192.168.1.254 > DHCPREQUEST on wlan0 to 255.255.255.255 port 67 > DHCPACK from 192.168.1.254 > SIOCADDRT: File exists > bound to 192.168.1.68 -- renewal in 41637 seconds. > > thanks > > MAC > >Ugh, It looks like you are just running "dhclient" without any interface >name! Try just "dhclient -v wlan1" and see if it works, because you are >getting some dhcp lease as far as I can see. I've been using 'dhclient wlan1' which gives the above. If I turn on the inbuilt receiver(wlan0)I get: Listening on LPF/wlan0/00:27:10:c9:9f:58 Sending on LPF/wlan0/00:27:10:c9:9f:58 Listening on LPF/wlan1/00:1a:ef:25:0a:56 Sending on LPF/wlan1/00:1a:ef:25:0a:56 Sending on Socket/fallback DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan1 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 14 but can't get connection. Inc. '-v' to dhclient I only get help text. MAC
-- http://linuxfromscratch.org/mailman/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
