Hi,
I've just completed my first LFS build, and upon moving on to the BLFS book,
I quickly realized that although the messages during boot indicate that the
network adapters are coming up fine, the network was, indeed, not up. I'll
paste my ifconfig.sit0 file and the output from `ip link`
As a note, I'm running the system in VMWare Workstation and my LFS host
(Fedora) came up fine. I did include the kernel module to support vmware
vmnet3 adapters. (apparently not what I needed?)
The output:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode
DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: sit0: <NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN mode
DEFAULT
link/sit 0.0.0.0 brd 0.0.0.0
ONBOOT=yes
IFACE=sit0
SERVICE=ipv4-static
IP=192.168.0.21
GATEWAY=192.168.0.1
PREFIX=24
BROADCAST=192.168.0.255
Thanks,
Kyle Brennan
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
