I recently finished installing LFS, and started working on BLFS. First task: get wireless working. I finally got the firmware loaded and ip link finds my interface (wlp9s0). It reports the interface as having no carrier, and being down and dormant. Issuing --IP link set wlp9s0 up-- makes no changes. When I use ifconfig, it show that my interface is up. I issue my wpa_supplicant command to the device, and it says wpa_supplicant successfully initialized. When I use DHCPCD, however, it waits for a carrier, but never receives one. If I use the following command-
wpa_supplicant -B -i wlp9s0 -c <(wpa_passphrase my_SSID password) It shows the MAC addresses talking to one another, but it says that the device disconnects locally (deauth_leave). It does this several times in a row, then periodically repeats the same string of output. Can anyone help me solve this problem? I have an Intel Centrino Wireless N 1030 card. I have iwlwifi installed and working (dmesg | grep iwlwifi shows the same information in my working Arch install). I know that the DHCP client and dhcpcd are working, because I can get internet access using my wired Ethernet adapter. Any help would be greatly appreciated! Mike -- http://lists.linuxfromscratch.org/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
