On Wed, October 1, 2014 2:15 pm, Michael Healy wrote: > I recently finished installing LFS, and started working on BLFS. First > task: get wireless working. I finally got the firmware loaded and ip > link finds my interface (wlp9s0). It reports the interface as having no > carrier, and being down and dormant. Issuing --IP link set wlp9s0 up-- > makes no changes. When I use ifconfig, it show that my interface is up. I > issue my wpa_supplicant command to the device, and it says wpa_supplicant > successfully initialized. When I use DHCPCD, however, it waits for a > carrier, but never receives one. If I use the following command- > > wpa_supplicant -B -i wlp9s0 -c <(wpa_passphrase my_SSID password) > > It shows the MAC addresses talking to one another, but it says that the > device disconnects locally (deauth_leave). It does this several times in a > row, then periodically repeats the same string of output. > > Can anyone help me solve this problem? I have an Intel Centrino Wireless > N 1030 card. I have iwlwifi installed and working (dmesg | grep iwlwifi > shows the same information in my working Arch install). I know that the > DHCP client and dhcpcd are working, because I can get internet access > using my wired Ethernet adapter. Any help would be greatly appreciated! > > Mike Hello,
The first thing that you should post is what version of lfs and blfs you are using. There are two versions of each. Giving assistance without knowing the basics just leads to guess work. Christopher. -- http://lists.linuxfromscratch.org/listinfo/blfs-support FAQ: http://www.linuxfromscratch.org/blfs/faq.html Unsubscribe: See the above information page
