Hi Lawrence,
Yes, it is data files I'm trying to burn.
I'm going to take a long break since I'm getting punchy and will
try your instructions again.
Margaret
----- Original Message -----
From: "lawrence taylor" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, June 21, 2007 10:19 AM
Subject: Re: [Blind-Computing] No Disk in Drive w. XP Burning Utility
Hi Margrett,
I didn't jump in here on the original thread so I might be missing a
couple
essential pieces of information. I assumed the guy was attempting to
burn
audio files using wmp10
When you place audio files into a targeted folder to be burn it
provides the
user with an option in the "context menu" to "add to burn list" So if
you
pressed the "applications key" and didn't find that option there this
could
only mean your files in the "targeted folder" are not audio. I may
have to
go and attempt to burn "data files" to see if I can duplicate your
problem.
Finally, the control A selects the files in the targeted folder and
because
one of the options under the "application key," is "add to burn list"
it is
not necessary to cut and paste. So you might be confusing the process
by
"cutting and pasting."
After you hit "add to burn list" wait a few seconds and wmp10 will
come up
and you complete the steps by tabbing over to "burn button" and than
onto
step 4...
----- Original Message -----
From: "Margaret Thomas" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, June 21, 2007 5:26 AM
Subject: Re: [Blind-Computing] No Disk in Drive w. XP Burning Utility
> Lawrence,
>
> I probably need more caffeine, but I tried your instructions a
> couple of different ways in case I was missing something, but I
> couldn't get them to work. I'm not finding any add to burn list in
> the context menu.
>
> Is this with the XP Burning Utility? I tried it with WMP 10 not
> loaded before I started the process and another time with it loaded.
> I'm also not getting exactly where the Control-A comes in. I'd hit
> Control-A to select the 3 files I want since they are the only files
> in the target folder for select all and then do a Control-C to copy
> them to the clipboard. Sorry, if I'm being dense, but your
> instructions are quite different from the ones I have that worked
> for
> me last year which were:
>
> First, select the files you want to burn in the usual way. Copy
> them
> to
>
> the clipboard in the usual way.
>
>
>
> Then put a cd in the cd drive. Open the cd drive and paste the
> files.
>
> The files won't be copied yet. They are copied to a temporary
> folder
>
> Windows uses for burning. You will see them as though they are on
> the
> cd
>
> but they are really in the temporary folder.
>
>
>
> then backspace once to get back to the list of drives. Down arrow
> until
>
> you get to the cd drive. Don't open the drive. Press the context
> menu
>
> key. Type the letter t for transfer files. The cd burning wizard
> will
>
> come up. Read the dialogs and follow the prompts. First you will
> be
>
> asked for a name. If you don't type one, today's date and current
> time
>
> will be used. After typing a title, if you want to specify one,
> press
>
> enter. You may be asked if you want to create a data or and audio
> cd.
>
> This choice is made with radio buttons. Select data cd. Press
> enter.
>
> The files will now be copied. After they are, the disk will eject
> and
> you
>
> will be asked if you want to copy the files to another cd. If you
> press
>
> enter, you will close the dialog and the files will not be copied to
>
> another cd. If you want to copy them to another cd, you have to
> check
> the
>
> checkbox in the dialog specifying this. Or perhaps you have to
> answer
> yes
>
> to a yes button. I don't recall now. After you copy the files to
> as
> many
>
> cds as you want and close the dialog by activating the finish
> button,
> the
>
> temporary files will be erased.
>
>
>
> Thanks,
>
>
>
> Margaret
>
>
>
> ----- Original Message -----
> From: "lawrence taylor" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Wednesday, June 20, 2007 4:50 PM
> Subject: Re: [Blind-Computing] No Disk in Drive w. XP Burning
> Utility
>
>
> I use Windows Media 10 to burn by performing the following steps.
>
>
>
> Step 1 Press control A to copy file or files from targeted folder
>
> Step 2 press the application key and arrow down to "add to burn
> list"
> At
> this point "window media player will appear.
>
> Step 3 tab over to "burn button" and enter. Some times it reads,
> "group burn
> button"
>
> Step 4 at this point insert your blank cd into the proper drive and
> tab over
> to "start burn button" and enter. When the burning process starts
> your
> "START Burn button" will read, "STOP BURN" If the button doesn't
> change from
> "START BURN" to "STOP BURN" this means you have a problem. What I
> like
> to do
> is use the jaws key and focus on the "Start burn button" and click
> with my
> left mouse key.
>
> Step 5 When the burning session is completed your computer should
> eject the
> cd and your finished. Simply alt 4 back to the desk top. If you want
> to make
> another copy of this work you'll need to tab over to the "List box"
> and
> check the file or files and return to step 4 in these instructions.
>
> Note: Some times the burning process will stop and the system will
> notify me
> that for whatever reason it can not burn 3 of my 16 files. It gives
> me
> an
> option to read the details why it can not continue to burn which I
> usually
> ignore, close the window and it ask if I want to continue burning
> the
> other
> 13 files and of course I do so I click or re enter on "start burn"
>
>
>
> I hope this helps. SMILe
>
>
>
> ----- Original Message -----
> From: "Jacob Kruger" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Wednesday, June 20, 2007 12:56 PM
> Subject: Re: [Blind-Computing] No Disk in Drive w. XP Burning
> Utility
>
>
> > Funny enough, every time when I 'paste files onto a writeable CD,
> > I
> > first
> > have to eject the blank, at which it prompts me to insert one, and
> > it then
> > writes the files when I re-insert it.
> >
> > HTH
> >
> > Jacob Kruger
> > Blind Biker
> > ----- Original Message -----
> > From: "Margaret Thomas" <[EMAIL PROTECTED]>
> > To: <[email protected]>
> > Sent: Wednesday, June 20, 2007 9:27 PM
> > Subject: Re: [Blind-Computing] No Disk in Drive w. XP Burning
> > Utility
> >
> >
> > > I just tried it with JAWS 6.2 and all 3 files pasted in the
> > > first
> > > time, but I got the same no disk in drive message when I went to
> > > the
> > > context menu and hit "t" to write the files.
> > >
> > > Margaret
> > > Earlier, I wrote:
> > >
> > >
> > > Hi All,
> > >
> > > I'm trying to burn some data files to CD using the Burning
> > > Utility
> > > in XP Home with SP2, JAWS 7.0, and WMP 10. I get a no disk in
> > > drive
> > > message when I actually try to burn the files. Sometimes all 3
> > > files
> > > I want to burn are pasted in the temporary file and sometimes 1
> > > is
> > > not
> > > pasted although Insert-shift-down arrow says all 3 are in the
> > > clipboard.
> > >
> > > I can play a commercially produced music CD.
> > >
> > > I had a similar problem with the same machine last year, but
> > > may
> > > have been using JAWS 6.2 at the time. The problem seemed to be
> > > solved
> > > when I bought a new pack of CD's. I successfully burned some
> > > files
> > > then, but haven't tried it since. I've tried it with 4 disks
> > > from
> > > what I think should be from that pack and have pulled out ones
> > > from
> > > the middle in case the first one was one of the infamous "dummy"
> > > ones.
> > >
> > > I know David put a burning program on the JAWS-Users page and
> > > I
> > > think one was added to the page for this list just the other
> > > day.
> > > Is
> > > there any point in trying one of them in case the XP burning
> > > utility
> > > isn't working properly? Should I get WMP 11?
> > >
> > > Any suggestions for being able to successfully burn the files
> > > would be greatly appreciated.
> > >
> > > Margaret
> > >
> > >
> > > Visit the Blind Computing List home page at:
> > > http://www.blind-computing.com
> > > Address for the list archives:
> > > http://www.mail-archive.com/not known right now
> > > To post to this group, send email to
> > > [email protected]
> > > To unsubscribe from this group, send an email to
> > > [EMAIL PROTECTED]
> > > For help from Mailman with your account Put the word help in the
> > > subject or body of a blank message to:
> > > [EMAIL PROTECTED]
> > > Use the following form in order to contact the management team
> > > http://www.blind-computing.com/contact.php
> > > If you wish to join the JAWS Users List send a blank email to
> > > the
> > > following address:
> > > [EMAIL PROTECTED]
> > >
> > >
> > > Visit the Blind Computing List home page at:
> > > http://www.blind-computing.com
> > > Address for the list archives:
> > > http://www.mail-archive.com/not known right now
> > > To post to this group, send email to
> > > [email protected]
> > > To unsubscribe from this group, send an email to
> > > [EMAIL PROTECTED]
> > > For help from Mailman with your account Put the word help in the
> > > subject
> > > or body of a blank message to:
> > > [EMAIL PROTECTED]
> > > Use the following form in order to contact the management team
> > > http://www.blind-computing.com/contact.php
> > > If you wish to join the JAWS Users List send a blank email to
> > > the
> > > following address:
> > > [EMAIL PROTECTED]
> >
> >
> > Visit the Blind Computing List home page at:
> > http://www.blind-computing.com
> > Address for the list archives:
> > http://www.mail-archive.com/not known right now
> > To post to this group, send email to
> > [email protected]
> > To unsubscribe from this group, send an email to
> > [EMAIL PROTECTED]
> > For help from Mailman with your account Put the word help in the
> > subject
> or body of a blank message to:
> > [EMAIL PROTECTED]
> > Use the following form in order to contact the management team
> > http://www.blind-computing.com/contact.php
> > If you wish to join the JAWS Users List send a blank email to the
> following address:
> > [EMAIL PROTECTED]
> >
>
>
> Visit the Blind Computing List home page at:
> http://www.blind-computing.com
> Address for the list archives:
> http://www.mail-archive.com/not known right now
> To post to this group, send email to
> [email protected]
> To unsubscribe from this group, send an email to
> [EMAIL PROTECTED]
> For help from Mailman with your account Put the word help in the
> subject or body of a blank message to:
> [EMAIL PROTECTED]
> Use the following form in order to contact the management team
> http://www.blind-computing.com/contact.php
> If you wish to join the JAWS Users List send a blank email to the
> following address:
> [EMAIL PROTECTED]
>
>
> Visit the Blind Computing List home page at:
> http://www.blind-computing.com
> Address for the list archives:
> http://www.mail-archive.com/not known right now
> To post to this group, send email to
> [email protected]
> To unsubscribe from this group, send an email to
> [EMAIL PROTECTED]
> For help from Mailman with your account Put the word help in the
> subject
or body of a blank message to:
> [EMAIL PROTECTED]
> Use the following form in order to contact the management team
> http://www.blind-computing.com/contact.php
> If you wish to join the JAWS Users List send a blank email to the
following address:
> [EMAIL PROTECTED]
>
Visit the Blind Computing List home page at:
http://www.blind-computing.com
Address for the list archives:
http://www.mail-archive.com/not known right now
To post to this group, send email to
[email protected]
To unsubscribe from this group, send an email to
[EMAIL PROTECTED]
For help from Mailman with your account Put the word help in the
subject or body of a blank message to:
[EMAIL PROTECTED]
Use the following form in order to contact the management team
http://www.blind-computing.com/contact.php
If you wish to join the JAWS Users List send a blank email to the
following address:
[EMAIL PROTECTED]
Visit the Blind Computing List home page at:
http://www.blind-computing.com
Address for the list archives:
http://www.mail-archive.com/not known right now
To post to this group, send email to
[email protected]
To unsubscribe from this group, send an email to
[EMAIL PROTECTED]
For help from Mailman with your account Put the word help in the subject or
body of a blank message to:
[EMAIL PROTECTED]
Use the following form in order to contact the management team
http://www.blind-computing.com/contact.php
If you wish to join the JAWS Users List send a blank email to the following
address:
[EMAIL PROTECTED]
