Hi Graham,
You didn't mention what operating system you are running.
Plugging a USB 2.0 hub into a USB 1.1 port will only give you the 1.1 speed.
Windows 98SE, doesn't support the USB2.0 standard, however Windows XP does.
If you have the PCI slot available, and the means of getting it done,
I would recommend installing a USB 2.0 expansion card which will give you as 
many as 4 external USB ports, and 2 internal ports.
You can pick up one of these cards for about $15 to $20.
An expansion card would be the preferred method, as opposed to an external 
hub.
If it is possible for you to do.
HTH,
Richard Q. Justice-website owner
www.blind-computing.com
----- Original Message ----- 
From: "graham smith" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, February 16, 2008 10:46 AM
Subject: [Blind-Computing] USB and Network Card



Hi

I have an older PC that has the older slower USB's in it.  If I purchase a 
new hub that is of the faster speed USBSwill it work as the faster usb or 
work to the same speed as the usb that it is plugged into.

The reason I ask is because we purchased a usb network card and when we 
installed the software it detected that we had the older usb's and 
recommended that we upgraded them for better results with the card.

We are not altogether pleased with the way the card is working at the 
moment, connection is sporadic  and we wondered if using a hub with the 
later usb's might help.

graham

 Visit the JAWS Users List home page at:
 http://www.jaws-users.com
 Address for the list archives:
 http://www.mail-archive.com/[email protected]/
 To post to this group, send email to
 [email protected]
 To unsubscribe from this group, send an email to
 [EMAIL PROTECTED]
 For help from Mailman with your account Put the word help in the subject
 or body of a blank message to:
 [EMAIL PROTECTED]
 Use the following form in order to contact the management team
 http://www.jaws-users.com/BlindComputing.php
 If you wish to join the JAWS Users List send a blank email to the
 following address:
 [EMAIL PROTECTED] 


 Visit the JAWS Users List home page at:
 http://www.jaws-users.com
 Address for the list archives:
 http://www.mail-archive.com/[email protected]/
 To post to this group, send email to
 [email protected]
 To unsubscribe from this group, send an email to
 [EMAIL PROTECTED]
 For help from Mailman with your account Put the word help in the subject 
 or body of a blank message to:
 [EMAIL PROTECTED]
 Use the following form in order to contact the management team
 http://www.jaws-users.com/BlindComputing.php
 If you wish to join the JAWS Users List send a blank email to the 
 following address:
 [EMAIL PROTECTED]

Reply via email to