Hi everybody,
As I expected, the Windows Backup utility in XP isn't so great, as
Microsoft is presenting.
You can make backup, but most of the time the backup is damaged or not
possible recovery. It couldn't save you from the virus infection, because
it only copy files to the same place.
I'm recommending Acronis true image or Norton, which will do a full hard
backup of your drive and recover byte to byte the drive.
With best regards,
Marek Durila
IBM Global Services Delivery Center Czech Republic, s.r.o., Sídlo: Brno,
Technická 2995/21, PSC 61600
IC: 26244535, Zapsaná v obchodním rejstríku, vedeném Krajským soudem v Brne
oddíl C, vložka 39922
IBM Global Services Delivery Center Czech Republic, s.r.o., Registered
address: Brno, Technicka 2995/21, Zip code: 61600
Company ID: 26244535, Entered in the Commercial Register maintained by the
Regional Court in Brno (Part C, Entry 39922)
Lennie Rinaldi
<merlin...@mchsi.
com> To
Sent by: [email protected]
blind-computing-b cc
oun...@jaws-users
.com Subject
Re: [Blind-Computing] Windows
backup utility and Karen's
08/08/2009 20:37 Replicater inquiry
Please respond to
blind-comput...@j
aws-users.com
Hi,
See below. This was taken from Microsoft. I think
that this will explain why you cannot create the floppy disk.
Hope this helps.
Lennie
An Error Message Is Displayed When You Attempt to
Use the Automated System Recovery Wizard
View products that this article applies to.
This article was previously published under Q302700
Expand all
|
Collapse all
SYMPTOMS
The Automated System Recovery (ASR) feature
enables users to create a set of floppy disks
that can be used to automate the process of recovering a failed
system.
When you attempt to use the ASR Wizard on Windows
XP Home Edition, you may receive the following error message:
Backup Utility
The files for recovery diskette could not be
created. The operation was cancelled.
If you receive this message, you may be unable to
create a backup set with ASR.
Back to the top
CAUSE
This behavior can occur because ASR is not
supported in Windows XP Home Edition. However,
Windows XP Home Edition users can access the ASR Wizard if they
install the Ntbackup program from the Valueadd
folder on the Windows XP Home Edition CD-ROM.
Back to the top
RESOLUTION
To work around this behavior, access the Automated System Restore Wizard:
list of 5 items
1. Install Backup Utility for Windows on the
Microsoft Windows XP Home Edition CD-ROM. Follow
these steps to install Backup Utility for Windows:
list of 2 items nesting level 1
1. Double-click the Ntbackup.msi file in the
following location on the Windows XP Home Edition
CD:CD-ROM Drive:\Valueadd\MSFT\Ntbackup
2. When the installation wizard is complete, click Finish.
list end nesting level 1
2. Click Start and, then click All Programs.
3. Point to Accessories, point to System Tools
and then click Backup on the All Programs menu.
4. Click the Advanced Mode link on the first
screen of the Backup and Restore Wizard.
5. On the Backup Utility dialog box, click the
Automated System Recovery Wizard button.
list end
NOTE: ASR does not function and is not supported on Windows XP Home
edition.
The ASR Wizard may create the floppy disks and a
backup file (Backup.bkf). The floppy disks,
however, cannot start the ASR process in Windows XP Home Edition
if they are used after a catastrophic system failure.
For catastrophic malfunctions that result in the
need for total data recovery, you must use the
following steps for the recovery process (which assumes
that a full backup had been performed a short
period of time prior to the equipment failure and subsequent data loss):
list of 3 items
1. Manually reinstall Windows XP from the installation media.
2. Install Ntbackp from the Valueadd folder of
the Windows XP installation CD-ROM.
3. Use Ntbackup to restore the data by using the
backup set that had been created prior to the system failure.
list end
Back to the top
You must go into the advance node to create a
full system backup. See the information below from Microsoft.
How to back up files and folders by using the Backup utility
After you install the Backup utility from the
CD-ROM, follow these steps to create a backup of your files and folders.
In order to back up files and folders, you must
be logged on to the computer as an administrator
or with a user that is part of the Administrators group.
http://support.microsoft.com/gp/admin
Note The following steps explain how to create a
backup manually by using the Backup Utility. You
can also create a backup by using the Backup and Restore
Wizard. However, the steps will be slightly
different from those that are listed in the following section.
list of 10 items
1. Start the Backup utility and select the files
and folders that you want to back up.
list of 5 items nesting level 1
1. Click Start, point to All Programs, point to
Accessories, point to System Tools, and then click Backup.
2. Click Advanced Mode.
Note If the Backup and Restore Wizard starts, the
utility is running in Wizard mode. You can click
to clear the Always start in wizard mode check box,
and then restart the Backup utility. If you
continue to use the Backup and Restore Wizard,
your steps will vary slightly from what is listed in this procedure.
3. Click the Backup tab.
4. On the Job menu, click New.
5. Select the check boxes next to the drives that
you want to back up. If you want to select
specific files or folders, expand the drive where these files
or folders are located. Then, select the check
boxes next to the files or folders that you want to back up.
list end nesting level 1
2. Select the System State check box that is
located under My Computer in the navigation pane.
3. If the Backup destination list is available,
click the backup destination that you want to use.
Notes
list of 2 items nesting level 1
• If you selected File in this step, type the
full path and file name for which you want to
back up data in the Backup media box or in the file name box.
• You can specify a network share as a
destination for the backup file. Typically,
backup files have the .bkf file name extension. However, you can use
any file name extension that you want.
list end nesting level 1
4. Click Start Backup to open the Backup Job Information dialog box.
5. Under If the media already contains backups, do either of the following:
list of 2 items nesting level 1
• If you want to append this backup file to
previous backup files, click Append this backup to the media.
• If you want to overwrite previous backup files
with this backup file, click Replace the data on the media with this
backup.
list end nesting level 1
6. Click Advanced.
7. Select the Verify data after backup check box.
8. In the Backup Type box, click the type of
backup that you want to create. For a description
of a backup type, click a backup type and the description
appears under Description. You can select any of the following backup
types:
list of 5 items nesting level 1
• Normal
• Copy
• Incremental
• Differential
• Daily
list end nesting level 1
9. Click OK, and then click Start Backup.
10. When the backup is complete, click Close.
list end
Back to the top
At 05:34 AM 8/6/2009, you wrote:
>Hi list,
>It's AC. I have two questions about the above programs.
>1. I can't create a full system backup of my HP Pavilian laptop using the
>Windows backup utility. I can do a backup of my documents and settings as
>well as choose what folders/files I want to backup with no problem using
>my external hard drive. However, when I tried to do a full system backup
>it wouldn't create the recovery disk and aborted the backup process.
>My external floppy drive is being recognized as well as my external hard
>drive. Does this mean there is possibly an issue with the Windows Backup
>Utility software? If so, what should I try?
>2. I am thinking about doing a full system backup using Karen's
>Replicater. Is this possible? I don't see a way to restore your files
>mentioned in the help documentation. I haven't read it all the way
>through just yet. It seems to be for just backing up specific folders and
>files and not a full system backup program. Am I wrong? If so, how could
>I do a full system backup using this program?
>Thanks in advance.
>AC
>____________________________________________________________
>You're never too old to date. Senior Dating. Click Here.
>http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTQbQWow4JuYuNyFhDRBCmR0DU0GO96svdWFxDGmDoLHfiZZ4kGt3q/
>
>For answers to frequently asked questions about this list visit:
>http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
