Hi David, Cuttin the speaker wires was not , out of the question! What do I do next? Sorry about the misspelled word, I must have cut off the " G " when I cut the speaker wires! I will wait for further instruction! Thanks much, take care. Mike
----- Original Message ----- From: David Ferrin To: [email protected] Sent: Wednesday, December 09, 2009 4:10 AM Subject: Re: [Blind-Computing] Volume blaring on Windows start up So I guess cutting the speaker wires is out of the question. Check out your master volume control and see if the wave level is set low compared to the master control. David Ferrin www.jaws-users.com VIP Conduit Tech Support www.vipconduit.com ----- Original Message ----- From: "Mike & Barbara" <[email protected]> To: "Blind Computing" <[email protected]> Sent: Wednesday, December 09, 2009 12:00 AM Subject: [Blind-Computing] Volume blaring on Windows start up Hi All, I hooked a KVM switch between 2 computers today and after doing so when Windows starts up on my main computer the volume blares loud enough to scare the snot out of you but, when Jaws starts the volume is normal. The volume doesn't blare on the other machine upon Windows start up. Does anyone have any ideas on how I can stop this volume blaring problem? I am running XPSP3 Home & Jaws 10/11 on the main machine and the secondary computer is running XP Pro & Window Eyes. All the volume settings are fine but, this problem only occurs upon Windows start up on the 1 machine. My ears will be eternally grateful if anyone has a resolution to this sinus clearing problem. Thanks much. Take care. Mike For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
