Thanks so much for the information. I've looked to see where the speakers are plugged in, so that's a start.
I may be able to get to Radio Shack over the weekend. thanks again, Karen ----- Original Message ----- From: "Stephan, William S NWK" <[email protected]> To: <[email protected]> Sent: Thursday, May 12, 2011 11:31 AM Subject: Re: [Blind-Computing] more on cassette to computer Karen: It sounds way harder than it really is. I had a bunch of stereo cassettes of music that's no longer available commercially that were deteriorating slowly, and I was able to digitize them with Gold Wave, and I am by no means a techie. Your sound card is where your speakers are probably plugged in now. There are maybe three jacks, and you'll have to figure out which one is the input. You might be able to use the microphone jack on the front of your PC, but on the two units I've done this with, they're mono. That probably doesn't matter if you're just after one track. Also, if you want to save some time and you're using Gold Wave, you should be able to play your cassette at the fastest speed, and then use Gold Wave to edit it down to normal speaking speed. Good luck. William S. Stephan Procurement Analyst, Kansas City District National Contracting Organization Building Strong(r) U.S. Army Corps of Engineers Office: 816-389-3801 FAX: 816-389-2029 Help us in Building Strong! Please tell us how we are doing. Visit our Interactive Customer Evaluation (ICE) Website at: http://ice.disa.mil/index.cfm?fa=card&service_provider_id=110800&service_cate gory_id=14 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
