Thanks. I'll check on one of those cables and hope the port assignment is
pretty straightforward. That would be wonderful to be able to accomplish.
-----Original Message-----
From: Stephan, William S NWK
Sent: Thursday, March 08, 2012 11:23 AM
To: [email protected]
Subject: Re: [Blind-Computing] USB and Braille Embosser
I have a Braille Blazerr, and recently switched to a USB only computer. A
good computer shop will have USB to parallel cables. You'll have to assign
a port number to the device, but a computer savy individual shouldn't have
much trouble with that.
William S. Stephan
Procurement Analyst, Kansas City District National Contracting Organization
Building Strong(r)
U.S. Army Corps of Engineers
Office: 816-389-3801
FAX: 816-389-2029
Help us in Building Strong! Please tell us how we are doing. Visit our
Interactive Customer Evaluation (ICE) Website at:
http://ice.disa.mil/index.cfm?fa=card&service_provider_id=110800&service_category_id=14
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of dgcnc
Sent: Thursday, March 08, 2012 8:44 AM
To: [email protected]
Subject: [Blind-Computing] USB and Braille Embosser
I have a client with a VersaPoint Duo braille embosser and am wondering if
anyone has experience with somehow converting it to be usable with USB
instead of parallel connection. The person it belongs to is not wanting to
replace an old desktop and wondering if it will be usable with a laptop
which only has USB. Are there embossers which use USB connectors or how does
a person work around this?
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
