Nope, I don't know of any that are blind friendly and ready to go. The pocket hole jigs are very easy to use and you will get the hang of it right away. The placement of the depth collar on the drill bit is critical to the system working properly. This is what determines that the screw comes out of the center of any particular thickness board. It is very easy to set. Just scan and read the instructions, or have someone read them for you and try it on a few practice pieces. You'll catch right on.
----- Original Message ----- From: Keith Christian To: blindhandyman@yahoogroups.com Sent: Saturday, March 24, 2007 11:41 PM Subject: RE: [BlindHandyMan] Pocket hole jigs. Hi Mickey, Yes, the jig came with a manual. I guess I was being a bit impatient and wanted to see if there was scanned and cleaned up version or maybe a video that may already exist. Thanks, Keith -----Original Message----- From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Mickey Fixsen Sent: Saturday, March 24, 2007 8:04 AM To: blindhandyman@yahoogroups.com Subject: Re: [BlindHandyMan] Pocket hole jigs. Hi Keith. Did you buy the Kreg brand tools? If so, there should be instructions on how to set up and use the tools. I don't know of any book or manual on how to use pocket holes. I will attempt to send you a direct e-mail,. Mickey ----- Original Message ----- From: Keith Christian To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com Sent: Friday, March 23, 2007 5:00 PM Subject: RE: [BlindHandyMan] Pocket hole jigs. OK Mickey, I went out and bought the Pocket Hole Jig System. It was $140 at Low's. The kit looks great. Do you know where I could get a manual for using it? I really am looking forward to making pocket holes. Thanks, Keith -----Original Message----- From: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com [mailto:blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com] On Behalf Of Mickey Fixsen Sent: Wednesday, March 14, 2007 11:26 AM To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com Subject: Re: [BlindHandyMan] Pocket hole jigs. I have been using 2 different models of the Kreg pocket hole tools for years. They are quality tools and well worth the price. As long as you have made good cuts on the boards, the pocket holes make very tight, strong joints. These tools are easy to use with very little learning curve. You must use the proper screws to make the system work correctly. All of the screws for this purpose have a flat pan head toward the shank of the screw and the top of the screw head is a low dome with a square drive. There are fine thread self-tapping screws for hardwood and coarse thread self-tapping screws for softwood. I think there are even special thread screws for particle and fiber board, although, I have used the coarse thread screws for this purpose with good results. They are available in various lengths and with different coatings, depending whether for indoor or outdoor use. In my shop, the Kreg pocket hole tools are a "must have" item. Good luck. ----- Original Message ----- From: Dan Rossi To: BlindHandyman@ <mailto:BlindHandyman%40yahoogroups.com> yahoogroups.com Sent: Wednesday, March 14, 2007 12:14 PM Subject: [BlindHandyMan] Pocket hole jigs. So I just read Ray's post on the Kreg R3 pocket hole joinery kit. I don't know much, or anything, about pocket hole joinery. Has anyone used this particular kit, or any others? Can anyone give me an idea on whether or not this R3 kit seems like a worthwhile investment? Or is there another pocket hole kit that you have used that is just the be all and end all of pocket joinery? thanks. -- Blue skies. Dan Rossi Carnegie Mellon University. E-Mail: [EMAIL PROTECTED] <mailto:dr25%40andrew.cmu.edu> cmu.edu Tel: (412) 268-9081 ---------------------------------------------------------- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.18.8/716 - Release Date: 3/9/2007 6:53 PM [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ---------------------------------------------------------- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.18.15/728 - Release Date: 3/20/2007 8:07 AM [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.17/732 - Release Date: 3/24/2007 4:36 PM [Non-text portions of this message have been removed] To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/blindhandyman@yahoogroups.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/blindhandyman/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
