Hi Clifford
I have heard of this done so the paint runs back into the can, however I
have not done this myself because I do not paint.
But if you were unsure of it sealing air tight again cling rap over the
can before you put on the lid should seal it air tight again.
 
Regards
Ray

________________________________

From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Tuesday, 22 May 2007 21:44
To: blindhandyman
Subject: [BlindHandyMan] punching holes in paint cans



Dear Ray:
I found most of the handy tips useful, but I did not understand one tip.
That was the one that recommended using a nail to make holes in the
trough which forms the top edge of the paint can, claiming that these
holes do not interfere with the resealing of the can of paint, as the
lid seals against the side. 
The paint cans with which 
I am familiar would leak and let in air, if holes were punched in the
groove. While some lids do cover the entire top and go down a slight
distance on the outside of the can or bucket, those are usually the
containers for drywall mud or thicker material, and are generally larger
buckets, five gallons or larger.
The one gallon and smaller cans are usually sealed with a lid that fits
inside the top rim. 
If you can shed any light on how holes can be punched in the groove 
without allowing for leaks or drying out the contents from the air going
in, I would appreciate it.

Yours Truly,

Clifford Wilson

[Non-text portions of this message have been removed]



 

**********************************************************************
This message and its attachments may contain legally
privileged or confidential information. If you are not the
intended recipient, you must not disclose or use the
information contained in it. If you have received this e-mail
in error, please notify the sender immediately by return
e-mail and delete the e-mail.

Any content of this message and its attachments which
does not relate to the official business of Eraring Energy
must be taken not to have been sent or endorsed by
Eraring Energy. No warranty is made that the e-mail or
attachment(s) are free from computer virus or other defect.
**********************************************************************



[Non-text portions of this message have been removed]



To listen to the show archives go to link
 http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/

The Pod Cast address for the Blind Handy Man Show is.
http://www.acbradio.org/news/xml/podcast.php?pgm=saturday

The Pod Cast address for the Cooking In The Dark Show is.
http://www.gcast.com/u/cookingindark/main.xml

Visit The Blind Handy Man Files Page To Review Contributions From Various List 
Members At The Following address:
http://www.jaws-users.com/handyman/

Visit the new archives page at the following address
http://www.mail-archive.com/[email protected]/  
For a complete list of email commands pertaining to the Blind Handy Man list 
just send a blank message to:
[EMAIL PROTECTED] 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/blindhandyman/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/blindhandyman/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[EMAIL PROTECTED] 
    mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

Reply via email to