Since I have never seen a Shop Smith, I don't know what facilities it has for anti-kickbacks. The only trouble I have had with kickbacks with my table saw was when I removed the guard, with its anti-kickback levers.
earlier, Max Robinson, wrote: >I finished cutting the boards today. The step, only one needed, is >basically a box that is 11 inches deep and 6 inches high. The one that is 6 >feet long has a couple of reinforcements in the middle as well as the end >pieces. The 3 foot long step has 1 reinforcement. The whole step is 6 >inches high and the decking boards, which are 5 and one half by 1 inch, on >top and bottom account for 2 inches. The vertical sides of the box, the end >pieces, and the internal bracing, need to be 4 inches wide. I ripped them >down out of the decking boards. When I was cutting the end pieces and >internal bracing I found out about kick back. I was standing out of the >line of fire. Sue had read me the warnings in the owner's manual so I knew >to stay out of the way. The first stick to be thrown almost hit my radio so >I moved it out of the way. When I was ripping the edges off the 3 foot and >6 foot boards there wasn't any kick back. Because the edges of a decking >board are rounded, I had to rip off both sides to get a flat edged board for >the vertical sides and the braces. All the pieces for both steps are cut >and tomorrow is put them together day. > >Regards. > >Max. K 4 O D S. > >Email: <mailto:max%40maxsmusicplace.com>[EMAIL PROTECTED] > >Transistor site ><http://www.funwithtransistors.net>http://www.funwithtransistors.net >Vacuum tube site: <http://www.funwithtubes.net>http://www.funwithtubes.net >Music site: <http://www.maxsmusicplace.com>http://www.maxsmusicplace.com > >To subscribe to the fun with tubes group send an email to, ><mailto:funwithtubes-subscribe%40yahoogroups.com>[EMAIL PROTECTED] > > > >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.5.472 / Virus Database: 269.8.4/825 - Release Date: >5/30/2007 3:03 PM John -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.6/828 - Release Date: 6/1/2007 11:22 AM To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/blindhandyman/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
