Hi, I am new to the list. With a "flat top" stove top, how do you locate the burner to place the pot or pan on it in the first place, and especially knowing when to readjust the pans positions when it is hot?
How to you manage the flat panel dials? My stovetop also has several burners with different burner size adjustments so that you can alter the burner size to fit the pan. I have heard many problems when appliances have flat panels. Any modifications or adaptations that anyone can suggest? Debbie ---- Original message ---- >Date: Fri, 27 Feb 2009 22:48:46 -0500 >From: "Lee A. Stone" <[email protected]> >Subject: Re: [BlindHandyMan] Burners? >To: [email protected] > > for those reason s I was glad when we switchted to a > fla top. Lee > > On Fri, > Feb 27, > 2009 at 03:55:29PM -0500, Spiro wrote: > > in the recent decade the wired type I own, > Choloric" has a large slide > > connector and a narrow slide on connector, so > there's no confusing them. > > The burner takes about a quarter twist and lifts > out easily if the > > potential junk has been cleaned from aroun it. > > The rubber gasket may need being pealed from the > burner if gunk and > > extended heat have disnintergrated it slightly. > > Calling the company's 800 number with model number > may work. > > > > > > > > > > > > On Wed, 25 Feb 2009, Dale Leavens wrote: > > > > > Have you figured out that you can lift one edge > to expose the drip tray under the burner? > > > > > > Usually this will be the front left around the > 7:30 position. Think of the burner being hinged at > around the 1:30 position. > > > > > > Some are connected with a plug on a wire, others > you lift only a short distance then pull, the socket > receptacle part is fixed and the burner pulls away. > I don't remember exactly how the wired type pull off > but either way, the element can be removed and if > you can find a source you can buy a replacement. > > > > > > Hope this is useful. > > > > > > ----- Original Message ----- > > > From: Claudia > > > To: [email protected] > > > Sent: Tuesday, February 24, 2009 11:52 PM > > > Subject: [BlindHandyMan] Burners? > > > > > > > > > Hi, > > > > > > Can I replace my stove burners? > > > I'm not sure how old it is, but it was here, > when we moved into the house 7 > > > years ago, and I need to replace them because > either the coding is wearing > > > off on some of them, or they're just too rusty > and not very cleanable? > > > > > > Thanks. > > > > > > Claudia > > > > > > Join either of my groups; the first is for > visually-impaired women, while > > > the other is for people wishing to discuss > homemaking issues. > > > [email protected] > > > [email protected] > > > > > > > > > > > > > > > [Non-text portions of this message have been > removed] > > > > > > > > -- > Q: Why did the germ cross the microscope? > A: To get to the other slide. > Are you curious? Visit my web site: > http://www.sedac.mailsent.net > > [Non-text portions of this message have been removed]
