For the primer, I would use a stain killing primer, which is actually a shellac, which covers stains and colors and will not let them bleed through. There are two brands that I am familiar with; one is KiILZ and the other is B.I.N. I believe both are available at Home Depot, Lowes and most paint stores. It is made of shellac because shellac is fast drying and the fact that it is fast drying keeps stains from showing through.
_____ From: [email protected] [mailto:[email protected]] On Behalf Of Lee A. Stone Sent: Tuesday, March 03, 2009 8:48 AM To: [email protected] Subject: Re: [BlindHandyMan] Re: Looking for free advice if there is loose paper it might be easier to try to reglue that than try to take the paper off and I agree with Tom and others a good coat of primer let it dry good and then at least one coat of paint. sand that molding in place because if you try to take it down or up while sanding it will split for sure. just a light paper to rough up the surface which will help hold the new paint.Lee On Mon, Mar 02, 2009 at 08:35:29PM -0000, JoVina Harris wrote: > --- In blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com, "Lee A. Stone" <se...@...> wrote: > > > > > > question about the paper. is this wall paper or just the paper on the > > wall board? Lee > > > >It's already there - um, I think it's called pre-pasted. > > jov > -- "... there could be talking bunny rabbits, spiders who write English messages in their webs, and for that matter, melancholy choo-choo trains. There could be, I suppose, but there aren't--so my theory doesn't have to explain them." [Daniel Dennett] Are you curious? Visit my web site: http://www.sedac. <http://www.sedac.mailsent.net> mailsent.net [Non-text portions of this message have been removed]
