SOmetimes you need to slip a flatbladed screwdriver in the front edge to release some clips. On Apr 6, 2009, at 4:16 PM, Kevin Doucet wrote:
> Hi, > > Ok, I found two brackets in the back of the machine. They held the > back of the top of the washer to the rest of the machine. But the top > only lifts up in the back and only for about 2 or 3 inches. I see no > way to release the front of the top of the machine. > > Any ideas? > > At 02:27 PM 4/6/2009, you wrote: > > >Ok, > > > >I got the water out of the tub and have the exhaust line and the hot > >and cold water supply hoses drained and disconnected. > > > >What am I going to encounter trying to get to the belt? > > > >At 02:03 PM 4/6/2009, you wrote: > > > > >Hi I think you should first get the water out of the machine, this > > >you can do with a peace of hose pipe that is filled with water, you > > >put the one end in the tub, and lower the other end into a bucket, > > >just make shore that the outside end is lower than the water inside > > >the machine. I got a suspicion that thee belt climbed off the > pulley. > > >Philip Theron > > >Piano tuner > > >Piano Music House > > >Tel.: [021] 948 6995 > > >Cell: [083] 635 6349 > > >Fax: [021] 949 8650 > > >Email: > > <mailto:philip%40isales.co.za><mailto:philip%40isales.co.za>[email protected] > > >www.pianomusichouse.co.za > > >----- Original Message ----- > > >From: Kevin Doucet > > >To: > > <mailto:blindhandyman%40yahoogroups.com><mailto:blindhandyman%40yahoogroups.com > > > >[email protected] > > >Sent: Monday, April 06, 2009 8:30 PM > > >Subject: [BlindHandyMan] washing machine woes > > > > > >Hi list, > > > > > >My washing machine just made a loud squealing noise. When I went to > > >stop it I smelt smoke. For safety sake, I also unplugged it. > > > > > >It was on the first empty cycle just after wash. Nothing is > cought or > > >hung up in the tub. Neither the adjitater or the tub will turn by > > >hand. The wash watter is not completely out of the tub. > > > > > >So, thrill seakers, first, how can I drain it and then what may be > > >wrong and how do I get access to the workings of the washer and > what > > >do I look for? > > > > > >Thanks for any help. > > >Way out of my legue here. > > > > > >---------------------------------------------------------- > > > > > >No virus found in this incoming message. > > >Checked by AVG. > > >Version: 7.5.557 / Virus Database: 270.11.42/2042 - Release Date: > > >2009/04/05 10:54 AM > > > > > >[Non-text portions of this message have been removed] > > > > > > > > > > > > > > >__________ Information from ESET Smart Security, version of virus > > >signature database 3975 (20090330) __________ > > > > > >The message was checked by ESET Smart Security. > > > > > ><<http://www.eset.com>http://www.eset.com>http://www.eset.com > > > > > > > > > >__________ Information from ESET Smart Security, version of virus > >signature database 3975 (20090330) __________ > > > >The message was checked by ESET Smart Security. > > > ><http://www.eset.com>http://www.eset.com > > [Non-text portions of this message have been removed]
