Ok, so I'm behind here, but there are no screws on the back at all? Even some that are the hex-type head?s On Apr 6, 2009, at 5:03 PM, Kevin Doucet wrote:
> Hi Dan, > > Ok, that worked but I see no way to get to the workings of this > machine. Also, I can't actually set the top aside as the wiring is > attached some ware in the bowels and I can't see how or if it > disengages easily. > > Well, the back does not come off. I did look at the bottom but it > seems to be held on with a latch and also many of springs. My thought > is these springs hold the drum in place and if I take these off I > will be in a world of hurt. > > At 03:30 PM 4/6/2009, you wrote: > > >Kevin, > > > >There may be a latch under the front edge of the washer. Get a puddy > >knife or something flat like that and try probing under the front > edge of > >the top of the washer. You should be able to push in on a spring > loaded > >latch then lift the top of the washer up. > > > >-- > >Blue skies. > >Dan Rossi > >Carnegie Mellon University. > >E-Mail:<mailto:dr25%40andrew.cmu.edu>[email protected] > >Tel:(412) 268-9081 > > > > > > > >__________ Information from ESET Smart Security, version of virus > >signature database 3975 (20090330) __________ > > > >The message was checked by ESET Smart Security. > > > ><http://www.eset.com>http://www.eset.com > > [Non-text portions of this message have been removed]
