A GFI plug will have 2 buttons. There is no specific placement of these buttons. I've seen one on top of the other as well as the 2 side by side.
One button is the reset. If the circuit has been tripped, this button will be pushed out. You just have to push it back in and the circuit should become hot again. The other button is the test. If it is pressed, it will cause a fault and the reset will pop out. If the buttons are one on top of the other and the plug is installed properly, the reset will or should be the top. You can't hurt anything by pushing each of them. In fact, that is what you most likely have to do. Hope that helps. Terry
