You can get a hard drive case a whole lot cheaper than that. I just bought one for $27 from Tiger Direct. It essentially converts a internal IDE or SATA hard drive into a external USB or Firewire device. Works great! I've even used it to copy some files I wanted from an old hard drive formatted in MS Dos 6.20.
Darrin Darrin Porter Senior Technical Engineer United Ocean Services, L.L.C. 601 South Harbour Island Boulevard, Suite 230 Tampa, Florida 33602 (813) 209-4247 (office) (813) 744-0011 (cellular phone) (813) 242-4849 (fax) [email protected]<mailto:[email protected]> ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Bob Kennedy Sent: Thursday, July 16, 2009 8:48 PM To: [email protected] Subject: Re: [BlindHandyMan] Lap Top Crash The first thing that comes to mind is taking the hard drive out. If it crashed, usually that means the hard drive was wrecked. You have said the hard drive still works, so if you're going to get rid of the rest of it, I'd take the hard drive out and then get an external case for the drive. That effectively converts the internal to an external hard drive. That way your other computer will see it as an extra drive and you'll still be able to access anything that is on it. The cases run anywhere from the 302 to about $80 or so. If you have anything of value, this will be the easiest way to keep it. You may be able to hook a USB cable from one to another and see if your working computer can see the other hard drive but I haven't had any luck with that. ----- Original Message ----- From: Keith Christian To: Blind Handyman Sent: Thursday, July 16, 2009 5:50 PM Subject: [BlindHandyMan] Lap Top Crash Hi, I do apologize if this is too far off the Handiman topic. but I am in a real jam and need some handiman help. My wife's laptop crashed. The hard drive is still good and I need to get the Outlook email messages and their attachments transferred to another computer. Does anyone know the names of the files and their location? I have backed up email to a pst file, but that is after issuing a command to save the file. I am hoping it is possible to do it without the pst file. Can anyone tell me how to do this off list or if you have any other ideas? I appreciate any help. Thanks, Keith [Non-text portions of this message have been removed] ________________________________ Attention: This email and any accompanying attachments constitute confidential and/or legally privileged information. If you have received this email communication in error, please notify the sender immediately and delete the message and any attachments from your system. [Non-text portions of this message have been removed]
