bRob: I don't know whether it would be possible to do that or not, probably somebody here though does know. I guess I'd be a little concerned about logs shifting and rolling if I were working on a stack of wood. Good luck with this and let us know what you wind up doing.
Bill Stephan Kansas Citty MO Email: [email protected] Phone: (816)803-2469 ----- Original Message ----- From: Rob Monitor <[email protected]> Date: Tuesday, August 18, 2009 3:41 pm Subject: Re: [BlindHandyMan] chainsaws.. > HI, Well I have no way of using a engine hoist or any thing like > that.. The logs are stacked on top of each other I had a logger > bring a 10 cord load in 8 foot Lank's... So I think the bottom > logs will be ground cover.. But there is a lot of logs on top of > the bottom ones that I can still use if I can cut them and move > them... So do you think that a guy could cut the logs the long way > OK?? > > ROB FROM MINNESOTA > ----- Original Message ----- > From: [email protected] > To: [email protected] > Sent: Tuesday, August 18, 2009 3:11 PM > Subject: Re: [BlindHandyMan] chainsaws.. > > > > Rob: I haven't thought this all the way through, but is there a > way you can hang a chain hoist near where you're working, then > lift your log and move the splitter under it? Or, do you have > access to something like a knockdown engine hoist? Also, how are > you able to cut these without your saw hitting the ground? > > Bill Stephan > Kansas Citty MO > Email: [email protected] > Phone: (816)803-2469 > > ----- Original Message ----- > From: Rob Monitor <[email protected]> > Date: Tuesday, August 18, 2009 2:29 pm > Subject: [BlindHandyMan] chainsaws.. > > HI, What I'm wondering is can a guy cut a log the long way > with a > > chainsaws with out hurting the saw or himself?? Why I'm asking > > this is I have a lot of oak logs that are about 24 inches > around > > and up from there... So when I cut a 16 to 18 inch off the log > I > > can't move it myself to put in the wood splitter... So I was > > thinking that if I cut down the long way on the log then cut > the > > 16 to 18 inch piece it would be in two pieces then maybe I > could > > move it... > > THANKS ROB FROM MINNESOTA > > > > [Non-text portions of this message have been removed] > > > > > > > > > [Non-text portions of this message have been removed] > >
