I'd have a look at the drillpress table from wood pecker. It is a much nicer table.
http://www.woodpeck.com/wpdrillpresstable.html On Fri, 16 Oct 2009 19:32:13 -0400you write: > >Lenny, if you get the table I got, you may want to make some changes >before you use it. The round nuts are fastened to the bottom with >small screws and will pull out of the wood, easily. I changed mine >so the nuts are on top and pull against the top of the table and the >clamps hold much better. > >earlier, Lenny McHugh, wrote: >>Hopefully tomorrow I will be making a trip to Grizzly. Been trying to get >>there for a few weeks. One of the items on my list is a 3/8 inch power twist >>link belt for my drill press. Has anyone converted the drill press to use >>these belts. My only concern is to get the belts to the correct length. My >>grizzly 7943 press uses two belts. When I upgraded the belt on my table saw >>the difference was almost unbelievable. All vibration went away, you can >>stand a nickel on edge while the machine is running.If we can get there I >>also plan to purchase the table for the drill press. I could not make one >>for what Grizzly is selling it for. >>Not sure how long I will be there it is a major (candy) store with over >>12,000 tools on display. >>--- >>Please visit my home page; it is motivational, inspirational and humorous >>with many resources for the blind. >>http://www.lennymchugh.com >>Lenny
