I am sure it would be fine so long as you have the correct size but have you considered boring a hole through the head of a bolt and inserting a bar like used to tighten pipe clamps so you don't have to find and fiddle with a wrench?
----- Original Message ----- From: "Lenny McHugh" <[email protected]> To: "handyman-blind" <[email protected]> Sent: Saturday, October 17, 2009 9:27 AM Subject: [BlindHandyMan] drill press modification > On my drill press there are locking screws to keep the table in place. > These > screws have wooden handles about 3 inches long. I do not have enough > strength in my hands to make them tight enough so that the table does not > move. I am wondering if there would be any problem if I replaced the > screws > with a hex nut head bolt and used a ratchet to tighten? The long handle on > the ratchet should give me enough leverage to tighten the table. > > --- > Please visit my home page; it is motivational, inspirational and humorous > with many resources for the blind. > http://www.lennymchugh.com > Lenny > Please Copy and Paste into New Message to pass along. Use BCC line when > addressing. > Help stop identity theft. > > > > ------------------------------------ > > Send any questions regarding list management to: > [email protected] > To listen to the show archives go to link > http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 > Or > ftp://ftp.acbradio.org/acbradio-archives/handyman/ > > The Pod Cast address for the Blind Handy Man Show is. > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > > Visit The Blind Handy Man Files Page To Review Contributions From Various > List Members At The Following address: > http://www.jaws-users.com/JAWS/handyman/ > > Visit the archives page at the following address > http://www.mail-archive.com/[email protected]/ > > If you would like to join the JAWS Users List, then visit the following > address for more information: > http://www.jaws-users.com/ > For a complete list of email commands pertaining to the Blind Handy Man > list just send a blank message to: > [email protected]! Groups Links > > > > ------------------------------------ Send any questions regarding list management to: [email protected] To listen to the show archives go to link http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 Or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [email protected]! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/blindhandyman/join (Yahoo! ID required) <*> To change settings via email: mailto:[email protected] mailto:[email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
