Ah. I feel better now...
----- Original Message -----
From: Agent086b
To: [email protected]
Sent: Saturday, December 05, 2009 12:14 AM
Subject: Re: [BlindHandyMan] Alining a saw blade when ripping
Sorry,
I was only thinking of putting the plastic against the blade to set the
fence. After setting the fence the square would be right out of the way.
-------- Original Message --------
Subject: Re: [BlindHandyMan] Alining a saw blade when ripping
From: Bob Kennedy <[email protected]>
To: [email protected]
Date: Saturday, 5 December 2009 15:42:06
> I don't think you want to use the square that way. If you touch the teeth
of the saw on plastic, the plastic will come apart.
>
> A much safer way would be to find out what the offset, the distance from
the edge of the saw to the blade, and add that to the final figure. You can
follow something with the edge of the frame and the saw blade will never touch
it.
>
> For that matter, you can clamp something on the board like a straight edge,
longer level or something along those lines and follow that with the saw as
well. Remember the saw blade is designed to cut things much tougher than
plastic and we don't want to have to tell you the best ways to deal with
plastic shards that you ended up wearing... hahaha
>
>
> ----- Original Message -----
> From: Agent086b
> To: [email protected]
> Sent: Friday, December 04, 2009 11:34 PM
> Subject: Re: [BlindHandyMan] Alining a saw blade when ripping
>
>
>
>
> Ray,
> this looks good as one of the adjustable squares I have has a plastic
> piece that slides along the metal long side of the square. Although I
> don't like that square it won't hurt the teeth of the saw putting the
> plastic bit on them.
> Max.
> -------- Original Message --------
> Subject: Re: [BlindHandyMan] Aliening a saw blade when ripping
> From: Ray Boyce <[email protected]>
> To: [email protected]
> Date: Saturday, 5 December 2009 14:23:51
>
> > Hi Max
> >
> > Well you could use a pair of inside callipers, a depth gauge, or your
> > combination square if the distance required is not to excessive.
> >
> > Ray
> >
> > From: [email protected] [mailto:[email protected]]
> > On Behalf Of Agent086b
> > Sent: Saturday, 5 December 2009 11:54 AM
> > To: Handyman
> > Subject: [BlindHandyMan] Alining a saw blade when ripping
> >
> >
> >
> >
> >
> > Hi all,
> > the earlier question and answers got me thinking. When ripping I find it
> > hard to measure from the fence to the saw blade accurately.
> > What wonderful answers can we get to this one.
> > Thanks as always for the help.
> > Max.
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Send any questions regarding list management to:
> > [email protected]
> > To listen to the show archives go to link
> >
http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
> > Or
> > ftp://ftp.acbradio.org/acbradio-archives/handyman/
> >
> > The Pod Cast address for the Blind Handy Man Show is.
> > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday
> >
> > Visit The Blind Handy Man Files Page To Review Contributions From Various
List Members At The Following address:
> > http://www.jaws-users.com/JAWS/handyman/
> >
> > Visit the archives page at the following address
> > http://www.mail-archive.com/[email protected]/
> >
> > If you would like to join the JAWS Users List, then visit the following
address for more information:
> > http://www.jaws-users.com/
> > For a complete list of email commands pertaining to the Blind Handy Man
list just send a blank message to:
> > [email protected]! Groups Links
> >
> >
> >
> >
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Send any questions regarding list management to:
> [email protected]
> To listen to the show archives go to link
>
http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29
> Or
> ftp://ftp.acbradio.org/acbradio-archives/handyman/
>
> The Pod Cast address for the Blind Handy Man Show is.
> http://www.acbradio.org/news/xml/podcast.php?pgm=saturday
>
> Visit The Blind Handy Man Files Page To Review Contributions From Various
List Members At The Following address:
> http://www.jaws-users.com/JAWS/handyman/
>
> Visit the archives page at the following address
> http://www.mail-archive.com/[email protected]/
>
> If you would like to join the JAWS Users List, then visit the following
address for more information:
> http://www.jaws-users.com/
> For a complete list of email commands pertaining to the Blind Handy Man
list just send a blank message to:
> [email protected]! Groups Links
>
>
>
>
[Non-text portions of this message have been removed]
