Yes thanks, I tried the NFB email address with no reply. Max. -------- Original Message -------- Subject: Re: [BlindHandyMan] Alining a saw blade when ripping From: Tom Fowle <[email protected]> To: [email protected] Date: Sunday, 6 December 2009 06:06:03
> Max, > If you can get ahold of a vernier caliper most of those have inside, outside > and depth measuring "points." > > You can then more easilly set the measurement you want from the tape to the > outside points on the caliper, then use the inside points to transferr it to > the inside measure between the blade and fence. > > You still have to make sure you're at 90 degrees. > > You can also put a regular tri square on the "outside" or opposite side of > the blade and add the blade cut width to your measurement. > > I believe NFB has something about international sales on there store web > site, that may help. > > tom Fowle > > > ------------------------------------ > > Send any questions regarding list management to: > [email protected] > To listen to the show archives go to link > http://www.acbradio.org/pweb/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=33&MMN_position=47:29 > Or > ftp://ftp.acbradio.org/acbradio-archives/handyman/ > > The Pod Cast address for the Blind Handy Man Show is. > http://www.acbradio.org/news/xml/podcast.php?pgm=saturday > > Visit The Blind Handy Man Files Page To Review Contributions From Various > List Members At The Following address: > http://www.jaws-users.com/JAWS/handyman/ > > Visit the archives page at the following address > http://www.mail-archive.com/[email protected]/ > > If you would like to join the JAWS Users List, then visit the following > address for more information: > http://www.jaws-users.com/ > For a complete list of email commands pertaining to the Blind Handy Man list > just send a blank message to: > [email protected]! Groups Links > > > >
