under tile.  Well, starting from the bottom, I have the plywood subfloor,
the heating mats, Kerdi membrane, and tile.
I think the mats I got, if you put it under wood, you need to put a layer of
thinset over the mats first, then glue the wood down, or use a floating
floor.
 
 Michael  
  _____  

From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Dave Andrus
Sent: Wednesday, February 24, 2010 8:58 PM
To: blindhandyman@yahoogroups.com
Subject: RE: [BlindHandyMan] Radiant floor heating.


  

Hi Michael, 

Your radient flooring that warms the floor. Did you put it under tile or
under wood? 

Dave A.

Working together, sharing the light of salvation seen through the cross of
Jesus

Rev. Dave Andrus, Director
Lutheran Blind Mission
888 215 2455
HTTP://WWW.BLINDMIS <HTTP://WWW.BLINDMISSION.ORG> SION.ORG 

-----Original Message-----
From: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com>
yahoogroups.com [mailto:blindhandyman@
<mailto:blindhandyman%40yahoogroups.com> yahoogroups.com]
On Behalf Of Michael baldwin
Sent: Wednesday, February 24, 2010 8:51 PM
To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com
Subject: RE: [BlindHandyMan] Radiant floor heating.

Nope, this Mike lives in Central Nebraska.

trust me, it has been cold here, and snowy.

Michael

_____ 

From: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com>
yahoogroups.com <mailto:blindhandyman%40yahoogroups.com>
[mailto:blindhandyman@ <mailto:blindhandyman%40yahoogroups.com>
yahoogroups.com
<mailto:blindhandyman%40yahoogroups.com> ] On Behalf Of Dan Rossi
Sent: Wednesday, February 24, 2010 8:24 PM
To: blindhandyman@ <mailto:blindhandyman%40yahoogroups.com> yahoogroups.com
<mailto:blindhandyman%40yahoogroups.com>
Subject: RE: [BlindHandyMan] Radiant floor heating.

Mike,

Don't you live in Florida? Or do Ihave the wrong Mike?

You are correct though. 50 watts per square foot isn't too bad. Say you do a
three foot wide, by 10 foot long section, that would be about 1.5KW for the
240 volt matts. So, 1.5KWH around here would cost about 30 cents an hour to
run. That's nowhere near as bad as Iwould have expected.

--
Blue skies.
Dan Rossi
Carnegie Mellon University.
E-Mail: d...@andrew. <mailto:dr25%40andrew.cmu.edu> cmu.edu
Tel: (412) 268-9081

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]

Reply via email to