Well you can pretend the stairway is an open plane door and you can ... um what
would you call diving into a basement. Not sky diving of course but you know
how to break the fall...
----- Original Message -----
From: Dan Rossi
To: Blind Handyman List
Sent: Sunday, May 23, 2010 10:20 PM
Subject: [BlindHandyMan] Building stairs.
I finished the basement floor project, including building the trap door to
access the central drain. The floor ain't pretty, just sheets of O S B,
but it seems quite sturdy.
As part of putting down the new floor, I ripped out the basement stairs,
which had been pretty seriously compromised by termites.
This weekend I started building the new stairs. Instead of cutting the
saw tooth stringers, much too tedious, I am just using 2X12s with the
treads and risers sandwiched between them. A lot simpler, but
never-the-less, pretty darn hard to cut those angles exactly right. The
big pain is just making sure the measurements are as exact as you can get.
Cutting off the ends of the 2X12 to get the angles for the upper and lower
ends took a while. I can easily calculate that I needed a 43.5 degree
angle but being able to measure out everything to cut that angle was
frustrating.
Being off a 16th doesn't seem like much until you get twelve feet away,
and suddenly you're an inch off from where you want to be.
Not to mention that the header I was resting the top of the stringer
against, was not even close to plumb, so if I wanted the stringer to rest
nice and flush against it, I had to re-cut it at a completely different
angle.
I got the stringers cut and mounted, but had to leave half way through
today, so one more week without steps I guess.
--
Blue skies.
Dan Rossi
Carnegie Mellon University.
E-Mail: [email protected]
Tel: (412) 268-9081
[Non-text portions of this message have been removed]
