Hi Etienne,
I could be out to lunch, but I always assumed for virtual interfaces the txque
does not matter as packets are immediate passed to the real interface.
Best Regards
Sebastian
> On Jan 20, 2016, at 18:09 , Etienne Champetier <[email protected]>
> wrote:
>
>
>
> 2016-01-20 17:54 GMT+01:00 Brandon Applegate <[email protected]>:
>
>> On Jan 20, 2016, at 11:47 AM, Etienne Champetier
>> <[email protected]> wrote:
>>
>> Hi Brandon,
>>
>> e quickly read the thread (maybe too quickly),
>> from what i remember for virtual interface txqueuelen is 0 by default, so
>> nothing work as expected
>> can you check the txqueuelen with ip -a ?
>> (i've found no reference to txqueuelen in sqm-scripts)
>>
>> see also
>> https://wiki.openwrt.org/doc/howto/packet.scheduler/packet.scheduler#tips
>
> I haven’t done anything manually to change txqueuelen. Whatever is here is
> default (1000 on eth) or I assume set by sqm-scripts / tc (32).
>
> I believe this is the output you are looking for:
>
> —
>
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP
> qlen 1000
> link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
> 3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP
> qlen 1000
> link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
> 4: eth0.666@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc htb state
> UP
> link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
> 5: eth0.10@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
> state UP
> link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
> 6: eth0.11@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
> state UP
> link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
> 7: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN qlen 32
> link/ether 52:18:cd:a7:ad:71 brd ff:ff:ff:ff:ff:ff
> 8: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN qlen 32
> link/ether 5e:f0:86:88:8d:8e brd ff:ff:ff:ff:ff:ff
> 11: ifb4eth0.666: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc htb state
> UNKNOWN qlen 32
> link/ether 86:68:83:69:2e:b2 brd ff:ff:ff:ff:ff:ff
> —
>
>
> no qlen means 0 I think
> maybe try
> ip link set eth0.666 txqueuelen 1000
>
> _______________________________________________
> Bloat mailing list
> [email protected]
> https://lists.bufferbloat.net/listinfo/bloat
_______________________________________________
Bloat mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/bloat
