Hi Heinrich On Thu, 18 Dec 2025 at 11:24, Heinrich Schuchardt <[email protected]> wrote:
> Hello Ilias, hello Vincent, > > I am currently reviewing EBBR v2.4.0-pre1. > > I guess a compliant software present all four of the GUIDs so that a > client looking for a certain compliance level will hit a match. > > Currently U-Boot only presents the > EFI_CONFORMANCE_PROFILE_EBBR_2_1_GUID. We should evaluate what is > missing with respect to the other levels. > > What I am missing in the EBBR spec is a table with the requirements > indicating in which version each requirement was added. > Testing would also become easier if each requirement were numbered. > We are currently doing testing. I don't see any failures against 2025.10, so I am assuming we are fine. The later requirements were mostly about 1. DT conformance 2. Functional testing of device like disk drives and ethernet interfaces. Cheers /Ilias > > Best regards > > Heinrich > _______________________________________________ boot-architecture mailing list -- [email protected] To unsubscribe send an email to [email protected]
