Hi All, Well, I made a point of checking the status of my mPower BT32 battery Wednesday night at nine o'clock when I had finished using it for the evening, and it gave me a level of thirty percent. Then, as I used the VoiceNote work purchased for me on Thursday, I didn't check the battery on my mPower again until I got home Thursday evening around six, at which time I was given a percentage of twenty-four percent. And, that is all I did at that point, just checked the battery status and turned off the unit. Also, although I didn't check it at that time, when I checked Wednesday night, I was indeed told that the gauge was accurate.
Then, around nine Thursday evening, I turned on the mPower and checked the battery and I was given a percentage of twenty-three percent. So, I put in my wireless card and proceeded to go to a website. However, while connecting to that site, I got a battery low message. Then, within five or so seconds of that, my Braille display went to the state it goes when the mPower is turned off. So, figuring the unit had ran out of juice, I took out the wireless card. And, although I couldn't get any Braille or speech from the unit, it beeped a couple of times. Then, I turned the unit off and it still was beeping every couple of seconds. So, I turned it back on again and did a space with e and the beeping finally stopped, and then I just turned the unit off and put it away for the evening, figuring I would charge it up again this weekend.
