actually, vickie solved the problem for me. i simply downloaded the us
manual upgrade, installed it in a folder and ran the program and it
appeared as a new folder called manual.
dan
At 04:24 AM 6/20/05, Rhonda Clark wrote:
I wish I knew how the pk was set up for sure. I'm doing a little guessing
here, but here it is.
First, look in the Manual folder of your Flash Disk using the File
Manager Directory option (so that you can view "hidden" files, which will
be the disexe files kept there). When you're in the "List of Files" of
the Manual folder, hit SPACE with X to get to the "List of All, including
Hidden" files. Look to see what files are in there. The only two files
which should be in that folder, are called bnb.exe and usbnb.exe so if
there are any others (like ones whose names start with UK or VN, or which
say Q instead of B), erase them, then exit and do a simple Reset. Check
to see if your User Guide is there. Also check to see if you have the
right version (go to the Index, and hit V).
If that didn't work, or if you only had the two aforementioned .exe
files when you looked in the Manual folder of the Flash Disk, run the
bnb.exe and usbnb.exe files from the Utilities Menu Application Program
option. Make sure to run them in that order (first bnb and then usbnb.
1) From the Main Menu, press U for the Utilities Menu, then A for
"Application Program".
2) At the "Run program from which drive?" prompt, press F to select the
Flash Disk.
3) At the "Run program from which directory?" prompt, press SPACE with
T to get into "Folder List" mode. Once in "Folder List" mode, type
"manual" (without the quotes). Alternatively, you can hit SPACE once to
get into a list of folders on the Flash Disk, press M to get to the
folders starting with that letter, and move down the list until you land
on "manual". Either way, once you've typed it in or navigated to it,
press ENTER to accept.
4) At the "Program Name?" prompt, SPACE through the list until you
reach bnb.exe and press ENTER to accept.
5) Leave the "Command Line?" prompt blank, and follow all subsequent
prompts.
6) Once installation of that file is complete, repeat steps 1-5.
However, in step 4, choose usbnb.exe second file's there to determine
which version of the Scientific Calculator chapter (chapter 8) you will
have (in your case, you have the one which lists symbols and numbers in
terms of Nemeth, used in the U.S.)).
7) Again, while running the second file, leave the "Command Line?"
field blank, and follow all subsequent prompts.
Once you're back up and running, check to see if your User Guide is
there. It should be since these executables install the manual. Also, hit
BACKSPACE with ENTER with H for the User Guide, and press I for the
Index, followed by V for "Version". ar----- Original Message -----
>From: dan kysor <[EMAIL PROTECTED]
>To: [email protected]
>Date: Sun, 19 Jun 2005 20:09:51 -0700
>Subject: [Braillenote] online manual
>i accidently errased the manual folder so where or how do I put the folder
>back on the pk?
>thanks
>___
>To leave the BrailleNote list, send a blank message to
>[EMAIL PROTECTED]
>To view the list archives or change your preferences, visit
>http://list.pulsedata.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.pulsedata.com/mailman/listinfo/braillenote
