Hi, Jim,
I can't do that yet--that is, read that part of the manual.
I have a Blazer and a very old inkjet. The latter has a serial port only.
Evelyn
At 01:25 PM 1/11/06, you wrote:
Evelyn,
Unfortunately the fifteen
dollar generic cable doesn't work. I tried two different cables, one
requiring drivers and another not requiring drivers and neither cable
worked. This has been the experience of most people who have tried
this. A more cokprehensive device is needed, read 6.3.1 in the M-power manual.
Thanks just the same.
Jim ----- Original Message ----- From: "Evelyn Weckerly" <[EMAIL PROTECTED]>
To: "Braillenote List" <[email protected]>
Sent: Wednesday, January 11, 2006 7:10 AM
Subject: Re: [Braillenote] Embossing to an embosser
hI, jIM,
mAYBE YOU SHOULD GET A CABLE WITH ONE SIZE AT ONE END AND THE OTHER AT
THE OTHER END. oR CAN YOU USE AN ADAPTER?
eVELYN
At 10:03 AM 1/11/06, you wrote:
Hello Kevin and List,
This hasn't been discussed since mid December but it has been a hot
topic on this list for some time so guess an update is in order.
Read the M-power manual under embossing topics, possibly embossing and
printing topics. There is a section on using a parallel port in section
6.3.1. An Edgeport Inside out parallel converter is recommended. It is
something like $160 to $200 or more just for this interface! I for one
think it is too high a price to pay, can get a printer for that
price. I ordered an infrared adapter from the manufacturer of my
Braille Embosser and haven't seen that come in yet. May need to call
them today! Ordering anything through the holidays can be risky at
times. There are some bluetooth devices around which are considerably
less but haven't found anyone using these devices thus far. My infrared
adapter or whatever it is called is $72. The bluetooth devices are
lower in price but don't know how well they do or don't work. I planned
to report back to the list once I get my infrared device but as I said,
it hasn't come in yet. This has been a sore point for me since the BN
use to do such a great job with embossers till the parallel port was
taken out of the M-power design.
This leaves the possibility of using a serial port. This might be
difficult with a Braille Blazer since that machine has the twenty-five
pin serial port instead of a nine pin, at least, that is how it is with
my vintage machine. The serial port on my Juliet Classic doesn't work
so am stuck with finding a solution for embossing from the parallel
port. I have used my classic BN to emboss my documents but this is a
pain I think.
As I say, once I get the infrared adapter, I'll report back. I haven't
heard anyone discussing how the edgeport does or doesn't work so that
should be an interesting discussion. Wish I could have helped you further.
Jim Aldrich
At 09:14 PM 01/10/2006 , you wrote:
Hey List,
I was wondering since there isnt a parallel port no longer available
on the mPower is it still possible to emboss to a embosser that still
uses a parallel connection, or is there a way to get around this, by
using a USB to parallel converter or of some sort. K, thanks list.
Kevin
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
