Go through? I have cable internet now did I simplify that phrase? I am not sounding I just want to be understood. Thankjs for the the help.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rhonda Clark Sent: Sunday, January 22, 2006 6:51 AM To: Braillenote List Subject: RE: [Braillenote] Connection Peter, you have a pc. You said you have cable. What does it go through? Sorry for not understanding. > ----- Original Message ----- >From: "Peter Wolfe" <[EMAIL PROTECTED] >To: "'Braillenote List'" <[email protected] >Date: Sat, 21 Jan 2006 22:04:26 -0600 >Subject: RE: [Braillenote] Connection >Nope I don't even have a router or a wirless card. What are my options? >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Rhonda Clark >Sent: Saturday, January 21, 2006 9:50 PM >To: Braillenote List >Subject: RE: [Braillenote] Connection >I assume you have a router then. If the router has an antenna, >you could go wireless. You would either need to get a wireless >card, or a ruggedized ethernet card, with the cable on the end. >Then, you'll be good to go. >> ----- Original Message ----- >>From: "Peter Wolfe" <[EMAIL PROTECTED] >>To: "'Braillenote List'" <[email protected] >>Date: Sat, 21 Jan 2006 21:40:37 -0600 >>Subject: RE: [Braillenote] Connection >>Thanks. I do not have any form of connection in at leat I don't >think so. >>I just have the basic M-Power. Does that count? I have cable >internet you >>know what I am saying. I would like with this further. thanks >>-----Original Message----- >>From: [EMAIL PROTECTED] >>[mailto:[EMAIL PROTECTED] On Behalf Of >Rhonda Clark >>Sent: Saturday, January 21, 2006 9:30 PM >>To: Braillenote List >>Subject: [Braillenote] Connection >>Hi Peter: >>I'm sending this, hoping it will help you somewhat. >>When setting up any new account information, do the following: >> 1. From the Main Menu, press E, S, D, A. You will see "entry >list of >>Directory of Email Accounts". >> 2. Press Enter. >> 3. "Account Name" is the first field. Put anything here that >will help >>you identify it. >> 4. Press Enter. >> 5. "User Name" is the next field. Put the first part of your >e-mail >>address in, up to the "at" part. >> 6. Press Enter. >> 7. "Password" is the next field. If your password includes >numbers, put >>them in lower case. >> 8. Press Enter. >> 9. "Your name" is the next field, so put that in. >> 10. Press Enter. >> 11. "your e-mail address" is the next field, and the whole >e-mail address >>is needed. If there are numbers, lower case numbers are >required. >> 12. Press Enter. >> 13. "pop server" add this entry. >> 14. Press Enter >> 15. "smtp server" put this in. >> 16. Press Enter >> 17. "smtp authentication required"? This is set to "no" but >some ISP'S >>require them. >> 18. Press Enter. >> 19. Press dot 2-6 chord to add the record. >>(Connectivity Side) >> 1. From the Main Menu, press Option, C, C. >> 2. "Entry list for connection configurations" is the first >field seen. >> 3. Press Enter. >> 4. "Connection configuration name" is next, so write in >whatever you'll >>remember. You can name it "dial up" or "DSL", since this is the >type of >>connection. >> 5. "Device to use" is next. If you are using dial up, you can >just press >>Enter. However, if it is an ethernet card, press dots 3-4-chord >until you >>see "ethernet network connection". You can press Enter here. >>(note: If you are using DSL, you can skip down to step 14). >> 6. If you are using dial up, add your phone number here and >press Enter >> 7. If you are using dial up, you will be asked for your >"service user >>name". Once again, add this information. >> 8. "Password is next, if you have dial up. >> 9. "Software compression" is next, and is normally set to >"yes." >> 10. "Use IP header compression"? This is usually set to "yes". >> 11. "Log onto network"? This is usually "no", unless you are >using it in >>conjunction with your PC. >> 12. "Wait for dial tone"? Generally, this is set to yes, but >it is up to >>you. >> 13. "Additional modem configurations"? You should just be able >to press >>Enter. >> 14. "Obtain an IP address automatically"? This is generally >"yes", though >>your setting is "no". If that is the setting, just press Y and >press ENTER. >> 15. Generally, you can press dot 2-6 Chord to add the record, >unless you >>are required to use a "proxy server", or a "DNS address." >>Wireless >> If you are using a wireless connection, do the following: >> 1. Put your wireless card in. >> 2. From Main Menu, press Options, C, W. >> 3. You will see "wireless card active; currently no." >> 4. Press Y for yes. >> 5. Space down to "scan for a network"? >> 6. Press Enter. >> 7. You will see "list of available connections." >> 8. Once you see it, press the Space bar to see a connection. >> 9. You will be placed into the "configuration items list." The >only thing >>you'll have to enter is your configuration name. >> 10. Press Enter. The SSID and all other settings should go >into their >>default values. >> 11. If you do not use WEP or other security, you should just >be able to >>save the configuration "as is", since the BN should pick up these >settings >>from the router. >> 12. Press dots 2-6 Chord to add the record. >>___ >>To leave the BrailleNote list, send a blank message to >>[EMAIL PROTECTED] >>To view the list archives or change your preferences, visit >>http://list.humanware.com/mailman/listinfo/braillenote >>___ >>To leave the BrailleNote list, send a blank message to >>[EMAIL PROTECTED] >>To view the list archives or change your preferences, visit >>http://list.humanware.com/mailman/listinfo/braillenote >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.humanware.com/mailman/listinfo/braillenote >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
