Hi Robert, You are correct on the mapping of the QT keys so if you do exactly as you did on your BrailleNote, the upgrade should run for you without a problem.
Ensure you have got the AC adapter connected and that the SD card meets the size requirements. Regards, Dean Jackson BrailleNote Product Specialist Humanware 11 Mary Muller Drive Christchurch new Zealand DDI: +64 3 940 2265 Fax: +64-3-384 4933 Email: [EMAIL PROTECTED] Internet: www.humanware.com Skype: pulsedata-support-nz__________________________ ----- Original Message ----- From: "robert" <[EMAIL PROTECTED]> To: "Braillenote Humanware" <[email protected]> Sent: Tuesday, January 24, 2006 5:18 PM Subject: [Braillenote] ks7 > Hello List, > I was just reviewing the instructions, for I am going to be > helping a friend with a qt mpower, download the ks 7. > I looked at the instructions again, and I thought earlier when I > installed my own version, that the keys to be held down were 4 > and 5 with the reset button which would be reset with jk on the > qt. > Now that I look at it, it says reset with 4 and 6 or reset with j > and l > Is this a mistake, or did I do it wrong? Well, my unit is working > just fine, and I did the reset with 4 and 5. > Also, when I had her do the reset with jk it reset and then the > whole system went flat. Is this because it needed to be reset > with j and l. > Thanks for any help. > Robert > > ___ > To leave the BrailleNote list, send a blank message to > [EMAIL PROTECTED] > To view the list archives or change your preferences, visit > http://list.humanware.com/mailman/listinfo/braillenote > ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
