Hi again Terry, When you set up the new connection, do you have a device to use of Ethernet network connection? I mean, you can connect the two devices via USB to establish the ActiveSync connection. But, to then share the internet/email with the PK after you have established that ActiveSync connection, you need to use the Ethernet network connection you just established. ----- Original Message ----- From: "Terry Clasper" <[EMAIL PROTECTED]> To: "'Braillenote List'" <[email protected]> Sent: Sunday, March 19, 2006 8:09 PM Subject: RE: [Braillenote] Help with Connection settings
HI vicky. Well I had looked at the section to which you refer and thought I'd done everything correct, however after your suggestion reviewed it all again and now when I connect via ActiveSync and the PK and PC think they are connected I then establish a new connection, step through the devices until I reach the USB connection, leave out the phone number and other irrelevant things, add the record then when I try to connect I get a device error 608. Any more help appreciated from anyone I'm sure I'm doing something stupid here and my mind isn't thinking properly probably to do with the 10 hour flight and 8 hour backward timeshift. Cheers folks all help appreciated. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Vicky Collins Sent: Sunday, March 19, 2006 7:39 PM To: Braillenote List Subject: Re: [Braillenote] Help with Connection settings Hi Terry, Looking in the PK manual starting under 12.13.5, it talks about how to do what I believe you are trying to accomplish. Essentially, you set up a new connection, name it whatever, I named mine ActiveSync. Then, at the device to use, cycle through until you get to Ethernet network connection and select that choice. Then, when you are connected via ActiveSync, by whatever means, use that new connection you made to access the email. ----- Original Message ----- From: "Terry Clasper" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, March 19, 2006 9:06 AM Subject: [Braillenote] Help with Connection settings All. I need some fairly urgent help. Essentially the hotel I am staying in doesn't have wireless access and when I try to connect a PK via a LAN card I get an error which may well relate to the fact that the IP knows I already have my PC registered for the service. So what I want to do is to share my PC's internet connection with the PK via Active sync. I can either do this via USB cable or BlueTooth it really doesn't matter. I've never had to do this before and although have tried some fairly simple steps to get it working it's not having any. The urgency is that I need my wife who's PK it is to be able to check her mail urgently as we are from the UK now in LA and are dealing with an eight hour backward timeshift meaning that in few hours it's the morning in the UK and she will need urgent access to her messages. Any help as ever gratefully received. Cheers! ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
