Hi Keven:
Here is a little more information about ethernet cards.
You will need an Ethernet Card (type Socket Low Power Ethernet
(LPE) EA2902-139, CF+ R/LP - E) - which has a ruggedized, i.e.
connected, cable.
You will also need access to a working ethernet computer network,
via a network capable PC, server, hub/switch/router or DSL modem.
When configuring the connection, use these specific settings:
At the "Device to Use?" prompt, select Ethernet Network.
At the "Obtain an IP address automatically?" setting, ensure it
is set to yes, unless the network uses static IP addresses as in
scenarios a and b below, where it is necessary to enter the IP
address manually. When set to Yes, this setting allows the
network to fill in the rest of the fields automatically except
the proxy server fields.
----- Original Message -----
From: Kevin Chao <[EMAIL PROTECTED]
To: [email protected]
Date: Sat, 01 Apr 2006 21:41:07 -0800
Subject: [Braillenote] Ethernet Card
Dear Listers,
I was wondering if someone can send me instructions on how to set
up the internet using an ethernet card.
Thank you very much.
Kevin
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
