Jose and others, You can copy an entire file to the clipboard. You have to go into the block commands menu to do this. First you would define the top of your block, which would be the top of the file you want to copy to the clipboard. You then go into the block commands menu and hit T for top of block. You will then be taken back into your file. You then go to the bottom of the document with read with B on a QT model. You then go back into the block commands menu, control with B on a QT, and selectC or coppy and it is copied to the clipboard.
I would strongly suggest that you do it this way rather than using the move command in the block menu, just in case something goes wrong. You will then have the file rather than risk loosing it. You can also insert files into other documents. To do this, you need to make sure you are in the document where you want to insert the file. You go to the block commands menu, Control with B, and press I. You will be prompted for the drive. Press enter after the appropriate drive is selected. It will then ask you for the folder name. Press enter after selecting the proper folder name. It will then ask you for the file name. Again press enter after the proper file is selected. You have now inserted the file into another document. I hope this helps. I do not know the commands for a BT model as I do not own a BT model. I have a Voice Note QT M-power. **All outgoing messages scanned for viruses using Norton Antivirus 2006. Karyn Campbell, [EMAIL PROTECTED] ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
